Part Number: BQ76930 Other Parts Discussed in Thread: BQ78350 , , BQ7718 , BQ78350-R1A Hi
I'm going to design as below.
-spec-
Part: BQ76930 , BQ78350, BQ7718
Cell: 10S
-Question-
1. What's the priority of protective actions for BQ76930 and BQ78350?…
Part Number: BQ7718 Hi
When discharge the voltage to exit OV protection, the delay time is how long? BQ771802 is not described in the datasheet.
Star
Thanks
Part Number: BQ7718 Hi Support team
My current connection is to connect the unused VC to ground but the D/S shows that the unused VC to VDD Can I make such a connection?
Part Number: BQ7718 The BQ7718 datasheet is bit confusing when looking at the "Device Comparison Table" in section 5. I believe the device only comes in two output drive variants:
"CMOS" with active push-pull to device VSS and VDD…
Part Number: BQ7718 Other Parts Discussed in Thread: BQ40Z80 , , BQ77915 Hello Team,
One of my customer had the following question.
we would like to use the BQ40Z80 also for lithium titanate cells, therefor we need a battery protector similar to BQ7718…
Part Number: BQ7718 Hi expert,
BQ7718's Vov is too high for Lithium Iron Phosphate batteries which need a threshold of 3.75V. Do we have any solution for that?
2 to 5 series should be good.
Thanks
Sheldon
Lithium Iron Phosphate ;
Part Number: BQ7718 Other Parts Discussed in Thread: BQ40Z80 , BQ77915 on our BQ40Z80EVM we implemented two BQ771807 as independent secondary overvoltage protection. The BQ40Z80 already brings the primary overvoltage protection. is the second level protection…
Part Number: BQ7718 Other Parts Discussed in Thread: BQ2947 , I hope use BQ7718xy OVP level 3.85V or 3.90V.
It is commented contact to TI on datasheet.
I also want to know about BQ2947. It is similar to BQ7718. I want to 3.85 or 3.9V OVP Level too.
Please…