Part Number: BQ7718 Hi Team,
I haven't seen the DS decribe about power on sequence for BQ7718.
if random connect cell, is there any concern?
ex: Vss-> V4 -> V1 -> V2 ->V5 -> V3 -> Vdd
Part Number: BQ7718 The BQ7718 datasheet is bit confusing when looking at the "Device Comparison Table" in section 5. I believe the device only comes in two output drive variants:
"CMOS" with active push-pull to device VSS and VDD
"NCH Active Low…
Part Number: BQ7718 Hi Support team
My current connection is to connect the unused VC to ground but the D/S shows that the unused VC to VDD Can I make such a connection?
Part Number: BQ7718 Hi expert,
BQ7718's Vov is too high for Lithium Iron Phosphate batteries which need a threshold of 3.75V. Do we have any solution for that?
2 to 5 series should be good.
Thanks
Sheldon
Lithium Iron Phosphate ;
Part Number: BQ7718 Other Parts Discussed in Thread: BQ7716 , Hello, where to place the external delay capacitance (chapter 9.1.1 d/s)? This is not described in the d/s. Is the delay timer on by default?
Regards, Holger
Part Number: BQ7718 Other Parts Discussed in Thread: BQ77905 How debalancing works under load conditions ?
Is the sensing circuit taking care for balanced loading of serial cells ?
Part Number: BQ7718 Other Parts Discussed in Thread: BQ40Z80 , BQ77915 on our BQ40Z80EVM we implemented two BQ771807 as independent secondary overvoltage protection. The BQ40Z80 already brings the primary overvoltage protection. is the second level protection…
Part Number: BQ7718 Please provide Land Pattern Example and Solder Mask Details.
Not included in Datasheet, nor at web based info page.
Are we able to support STEP 3D import data for layout group ?
Part Number: BQ7718 Other Parts Discussed in Thread: BQ2947 , I hope use BQ7718xy OVP level 3.85V or 3.90V.
It is commented contact to TI on datasheet.
I also want to know about BQ2947. It is similar to BQ7718. I want to 3.85 or 3.9V OVP Level too…
