Part Number: BQ78350-R1A Tool/software: Hello, I am working on an end of line tester to confirm function of the under voltage and over voltage protections. I had been using a tester on the board prior to assembling to the cells by using a power supply…
Part Number: BQ78350-R1A Other Parts Discussed in Thread: BQSTUDIO , BQ769400 , BQ78350 Tool/software: Hi,
I'm using the AFE BQ7694001, Companion BQ78350-R1A, and STM32 MCU in the BMS design board. However, I'm experiencing issues with cell voltage inaccuracies…
Part Number: BQ78350-R1A Tool/software: Dear Expert,
In reference to our previous discussion on the forum - e2e.ti.com/.../5363541
According to the AFE datasheet, the GAIN and OFFSET values are stored in the EEPROM. Could you please clarify whether the…
Part Number: BQ78350-R1A Other Parts Discussed in Thread: BQ78350 , BQ76930 , BQ2060A , BQ76930EVM Tool/software: Hello,
We recently released a new product using the BQ78350 and BQ76930 AFE. I wanted to see if TI has any recommended End of line tests for…
Part Number: BQ78350-R1A Other Parts Discussed in Thread: BQ78350 , BQSTUDIO , EV2400 "Hi,
I encountered a communication failure between the bq78350-r1a, AFE, and MCU, affecting both I2C and SMBus. We conducted tests and found no physical or electrical…
Part Number: BQ78350-R1A Tool/software: Hello,
I use BQ78350-R2 in my BMS, i have problem about COV recovery voltage define.
i would like to know that how can i set COV recovery voltage acording to different temp range,
Which of the following values…
Part Number: BQ79616 Other Parts Discussed in Thread: BQ78350-R1A , BQ76930 , , BQ78350 , BQ76942 Tool/software: Hi,
The customer reviewed the design with BQ76930 + BQ78350-R1A on BMS.
The customer's BMS production must have a 15-year warranty.
However…
Part Number: BQ78350-R1A Tool/software: Hi,
Customer asks about BQ78350-R1A certification.
How far did you get the UL standard certification?
Please check the UL certification.
Hello Niklas,
Niklas Baumgartner said: Does not this not create a problem that the BQ78350 thereby sends "itself" a command, if it wants to address the BQ76920, since they are all on one bus together?
No it would not, since the addresses is different…
Part Number: BQ78350-R1A Tool/software: Hi Team,
I have a question for Vscale,
If need to scale by 10, I think 0X01 is enough.
However, the TRM show 0x02 and 0x03 all refer to scale of 10.
Is selecting all three required? Or just one?
Best Regards…
