Search tips
Showing 17,053 results View by: Thread Post Sort by
    Answered

  • BQ78350-R2-DEVICE-FW: First Remaining Capacity report not correct !

    Resolved
    Part Number: BQ78350-R2-DEVICE-FW Other Parts Discussed in Thread: BQ78350 Hi , We use bq78350 as gas-gauge and get battery information with MCU through SMBUS , but found the RM was 0 eve the batery cells voltage was high (3.8V). Would like to know…
    • Resolved

  • BQ78350-R2-DEVICE-FW: FCC update flag question !

    TI Thinks Resolved
    Part Number: BQ78350-R2-DEVICE-FW Other Parts Discussed in Thread: BQ78350 We need to know when the FCC been updated in bq78350 ? I read the technical reference manual , there is FCCX bit in the 0x0056 GaugingStatus command, at section 17.2.40 it said…
    • Answered

  • BQ78350-R2-DEVICE-FW: Wake up from SHIPMODE with delay

    Resolved
    Part Number: BQ78350-R2-DEVICE-FW Other Parts Discussed in Thread: BQ78350 Hello a 7S 2P battery pack of ours is designed for a customer application. In that application there is a big capacitor 1000mF and 63V connected to the battery terminals. Sometimes…
    • Resolved
    • Answered

  • BQ78350-R2-DEVICE-FW: Documentattion regardng the BQ78350-R2-DEVICE-FW and the BQStudio

    Resolved
    Part Number: BQ78350-R2-DEVICE-FW Other Parts Discussed in Thread: BQ78350 , BQSTUDIO , BQ78350-R1 Hi there, I'm working with the device BQ78350 with R2 release and the BQstudio, as you can see in the picture attach. I would like to know where I can…
    • Resolved

  • BQ78350-DEVICE-FW: BQ78350 _ R3

    Part Number: BQ78350-DEVICE-FW Tool/software: I also tried same test with my current is below quite current, but still rest mode is not triggered. how to enable cell balancing in rest mode. Here i also attached my configuration file for understanding…

  • BQ78350-DEVICE-FW: Cell Balancing at Rest not working

    Part Number: BQ78350-DEVICE-FW Other Parts Discussed in Thread: BQSTUDIO , BQ78350 Tool/software: Hello! I have a problem with cell balancing at rest with bq78350R3. I have a 15S LiFePO4 battery where cell balacing at rest is necessary. * bqz Device…
    • Answered

  • BQ78350-DEVICE-FW: Data Flash Summary Table for the R2 and R3 firmware

    Resolved
    Part Number: BQ78350-DEVICE-FW Other Parts Discussed in Thread: BQ78350-R1A , BQSTUDIO Hi Sir, The document "BQ78350-R1A Technical Reference" indicates that the Cell Balance Threshold's address is 0x460D. However, our testing of the firmware for R2…
    • Resolved

  • BQ78350-R2-DEVICE-FW: BQ78350-R2-DEVICE-FW

    Part Number: BQ78350-R2-DEVICE-FW Other Parts Discussed in Thread: BQ78350-R1 , BQ76930 Hi: We have an application where two identical battery modules (labelled Pack 1 and Pack 2) are connected in parallel. Each battery pack is running V2.02 R2 device…
    • Answered

  • BQ78350-R2-DEVICE-FW: Coulomb counter deadband and Sleep mode

    Resolved
    Part Number: BQ78350-R2-DEVICE-FW Other Parts Discussed in Thread: BQ78350 Hello, we have a battery pack for a special power tool where the bq78350 is set with an IPSCALE of 0x1 (the current is scaled by 10mA). The Current deadband is set to 1, so…
    • Resolved
    • Answered

  • BQ78350-R2-DEVICE-FW: BQ78350-R2-Device-FW

    Resolved
    Part Number: BQ78350-R2-DEVICE-FW Other Parts Discussed in Thread: BQ76920 , BQ78350-R1 , BQSTUDIO Using BQ76920 AFE with BQ78350-R1 Using Device number: 1E9B, Firmware Version 2.02, Build 28 Temperature Enable is set to 0x09 (external TS1 present…
    • Resolved

Didn't find what you are looking for? Post a new question.