Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: BQ78412 Other Parts Discussed in Thread: GPCCHEM Tool/software: Code Composer Studio Dear,
I contacted the Customer support center and they advised me to post my question to this form.
The problem I'm encountering is that the SOC jumps suddenly…
Part Number: BQ78412 Other Parts Discussed in Thread: BQ34Z100-G1 Is there any recommendation to replace bq78412? I would like to have one IC to measure capacity on lead-acid battery.
My design is 105Ah lead-acid battery. only bq78412(up to 327Ah) is…
Other Parts Discussed in Thread: BQ34Z100-G1 , BQ78412 Dear team,
My customer will soon test a new design and selected BQ74812 for its gas gauge.
Since the project will be in production for several years, I guess this would be best for them to use BQ34Z100…
Hi,
This is due to Peukert-effect - basically the rated capacity (in your case 15Ah) is measured at specific discharge rate (current). Any other current will result that you could get higher or lower overall capacity (Derated FCC). The bigger the discharge…
Other Parts Discussed in Thread: BQ78412 , BQ34Z100-G1 , BQ34Z100 Hi team,
would you suggest if BQ78412 is suitable for 6 series 12V Pb-acid cell application? customer need to monitor the battery voltage, current, temperature and the run time to empty.
If…
Other Parts Discussed in Thread: BQ78412 Can someone please point me to the download link for installing the bq78412 API described in this document http://www.ti.com/lit/ug/sluu473/sluu473.pdf ?
Other Parts Discussed in Thread: BQ78412 Hello,we have BQ78412EVM board. In the first place everything worked fine, except the bq784XX Software showed a Voltage of 12000 Volts, so I reconfigured the VoltageGain to 1007080000000,000. Now the software displays…
2047.BATTERY_CHG_LOG_1023..xlsx
Hello
currently, I use BQ78412 to calculate lead-acid battery capacity.
but I found the SOC and RM,DeratedFCC has jump issue.
does you can provide who can support the chip?
if possible, i need direct send E-mail and it will…
Other Parts Discussed in Thread: BQ78412 Dear All,
Please help me to start with BQ78412 IC for battery charging & discharging monitoring.
I need to monitor the battery charge under charging & discharging conditions for 12V,180Ah.
Please guide me…
Dear All,
Can I use this IC for the battery that is used in Engine(Connected to starter motor of the engine)?
Please reply.
Thanks & Regards,
Sathish Kumar.C