Part Number: BQ79616 Tool/software: I am trying to read what the fault register data is however I don't receive any signal from the TX line on the BQ79616. NFAULT line set to low ~3ms after transmitting any read/write request.
UART baud rate set …
Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79616 , USB2ANY Tool/software: Dear TI support team, I am involved in the hardware development of our battery management system using the BQ79616 and BQ79600 with a STM32 for our Formula Student…
Part Number: BQ79616 Tool/software: Hi, Experts,
our team is checking how to use BQ79616 for development since the daisy chain of BQ79616 is helpful.
a question came to our mind is the daisy chain bridge BQ79600 is mandatory or not?
Is the below diagram…
Hello Luis, so I am now communicating with my HW. The whole problem was that after starting I sent wake-up and addressing + settings. The components responded, but the first BQ did not send anything from the second BQ. Thanks to your SW I found out the…
Part Number: BQ79616 Tool/software: Dear experts,
In my application case, there is negative cell voltage indeed.
for instance, A point = -1V, B point = -2V, C point = -3V, D point = -4V, etc. BQ79616 is powered externally.
in this case, BQ79616 is…
Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79616 Tool/software: Hi Team,
I have requested for example code of BQ79616. Please provide the link for the same.
Thank You.
Part Number: BQ79616 Tool/software: Dear Experts,
The normal cell sequence is bottom up for sure. unfortunately, there is a need to have a top-down cell sequence in our applicaiton case.
you can find the diagram below for a 24S setup.
The CELL sequence…
Part Number: BQ79616
Tool/software:
Dear experts,
In my application case, there is negative cell voltage indeed.
for instance, A point = -1V, B point = -2V, C point = -3V, D point = -4V, etc. BQ79616 is powered externally.
in this case, BQ79616 is able…
Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: BQ79616 , USB2ANY Tool/software: Hello,
I’m trying to evaluate the bq79616 EVM using the BQAutoEval GUI to develop a custom board for a battery balancer application. We purchased both the bq79616…
Part Number: AM2632-Q1 Other Parts Discussed in Thread: BQ79616 , Tool/software: Hello TI team,
We are currently using AM2632-Q1 communicating with BQ79616 AFE. Based on the sample code provided for TMS570 + BQ79616, the procedure to wake up the BQ79616…
