Part Number: BQ79616 Tool/software: Hi, Experts,
our team is checking how to use BQ79616 for development since the daisy chain of BQ79616 is helpful.
a question came to our mind is the daisy chain bridge BQ79600 is mandatory or not?
Is the below diagram…
Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79616 , BQ79600-Q1 Tool/software: Dear Team,
I have one bq79600 and two bq79616 devices. When I send a wakeup tone, I was able to see 5v at the neg5v pin on both devics , indicating that the devices…
Luca,
Sorry about the delayed response.
No. You cannot use other functionalities while the ADC Comparison Diagnostic is underway. The comparison should be relatively short (AUXCELL settling time + one round robin cycle time) and it will not automatically…
Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79600-Q1 , USB2ANY , BQ79616 Tool/software: I'm having issues in the auto-addressing procedure. Our lab setup has a BQ79600 and two BQ79616s, and I'm facing two issues previously documented in other…
Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79616 , BQ79600-Q1
Tool/software:
How many devices can be chained when using BQ-79600-Q1? I understand that since the device adress of each of the BQ79616-Q1 is of 8 bits, the device would support…
Hi Pranav-san,
Thank you for the reply. My question is that if the BQ79616-Q1 gets broken, Does BQ79616-Q1 still continue outputing correct cell value?
Best regards,
Shunsuke Yamamoto
Hello Luis, so I am now communicating with my HW. The whole problem was that after starting I sent wake-up and addressing + settings. The components responded, but the first BQ did not send anything from the second BQ. Thanks to your SW I found out the…
Guillermo,
Sorry for the delayed response.
This functionality is not available in the BQ79616 device. Attempting to emulate further stack devices using "My Device" is simply not possible using the BQ79616. When it is configured as a stack device (when…
