Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79616 , Tool/software: Hi All,
We have a schematic we'd like to have reviewed/get feedback on if at all possible. Mostly wanting to make sure we didn't miss anything obvious before sending it…
Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79616 Tool/software: Hi Team,
I am using two BQ79616 IC's in daisy chain, the communication between MCU and base IC is through level shift circuit using UART.
I am using a configuration for…
Part Number: BQ79616 Tool/software: Dear Experts,
is it workable for a mixed daisy chain isolation like this?
There are two BQ79616 on each PCB using capacitor isolation, PCB1, PCB2, PCB3.
PCB2 is closer to PCB1, so a capacitor isolation cable…
Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: BQ79616 Tool/software:
Hello everyone,
While examining the BQ79616 reference design, I thought about placing balance LEDs on the CB pins, but where should I position the LEDs? Can you…
Part Number: BQ79616 Other Parts Discussed in Thread: BQ79600EVM , USB2ANY , Tool/software: I'm currently using a setup with a USB2ANY (connected to the bridge), a BQ79616EVM (as a stack device), a BQ79600EVM (as the bridge) and a LaunchXL2-TMS57102 …
Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79616 Tool/software: Hello I am planning to build a 48S system by stacking BQ79616 modules. I intend to use GPIO3 to ensure balancing between the modules. 1) Is the following diagram sufficient…
Part Number: BQ79616 Tool/software: Dear experts,
In my application case, there is negative cell voltage indeed.
for instance, A point = -1V, B point = -2V, C point = -3V, D point = -4V, etc. BQ79616 is powered externally.
in this case, BQ79616…
Part Number: BQ79616-Q1 Other Parts Discussed in Thread: BQ79616 , Tool/software: Hi,
I have a couple of concerns before using TI parts.
I am planning to use the BQ79616 IC for fuel cell voltage monitoring.
Currently, I am working on a hydrogen…
Part Number: BQ79616 Tool/software: Dear Experts,
At present, we are using the CVDD output voltage of BQ79616 to power the external digital isolation chip, and found that CVDD ≈ LDOIN=4.4V. At this time, the NPN selected model is Nexperia BCP56-16T…
