Search tips
Showing 66 results View by: Thread Post Sort by

  • RE: BQ79616EVM-021: No response for auto-addressing read commands

    Zujajah, Because there is no response frame received so SPI_RDY remains low. Can you please check your CRC algorithm and value for the read command? If the CRC is wrong, the devices will discard the command and no response frame will be transmitted.
    • Answered

  • BQ79616EVM-021: PCB files

    Resolved
    Part Number: BQ79616EVM-021 Hi Experts, Our customer needs the PCB files for BQ79616EVM-02. If this is available and can be shared to our customer, may we ask if you can share it here? Thank you. Best regards, Gerald
    • Resolved

  • BQ79616EVM-021: GPIO ADC AUX Issue

    Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: TMS570LS1224 , BQ79616 Hello I'm trying to use the BQ79616EVM-021 with the hercules TMS570LS1224, with the exemple provided by texas I was able to read the voltage from the battery. Now…
    • Answered

  • BQ79616EVM-021: Is Auto addressing sequence necessary after every wakeup on bq79616?

    Resolved
    Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: BQ79616 , BQ79616-Q1 SO i have BQ79616 EVM, and we successfully communicated using UART. Now question is the After WAKEUP tone, do we need to carry out auto address process everytime after wakeup…
    • Resolved

  • BQ79616EVM-021: BQ79616Evm CAN NOT AUTO ADDRESSING

    TI Thinks Resolved
    Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: BQ79616 , , MSP430FR5994 , USB2ANY HI,teams The functions I want to implement using BQ79616 are as follows BQ79616EVM-021: BQ79616 can not wake up - Power management forum - Power management -…
    • Answered

  • BQ79616EVM-021: BQ79616 EVM: Not receiving any message on UART

    Resolved
    Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: BQ79616 I have bq79616EVM board which I am trying to interface with a microcontroller through UART. I am following the procedure given in datasheet as follows: First a wake pulse of 2.5ms is…
    • Resolved
    • Answered

  • BQ79616EVM-021: Cell monitoring without passive balancing?

    Resolved
    Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: BQ79616 Hi Experts, Can this board BQ79616EVM-021 be operated for cell monitoring only without passive balancing? Thank you. Regards, Archie A.
    • Resolved

  • BQ79616EVM-021: BQ79616EVM Tx Pin can't read any data in UART communication

    TI Thinks Resolved
    Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: MSP430FR5994 , BQ79616 , USB2ANY HI,teams: I want to use one MSP430fr5994 launchpad and one BQ79616EVM-021 to accomplish UART communication. Now,I can wake up the BQ device and send some com…

  • BQ79616EVM-021: How can I address the INVALID_CBCONF flag when initiating automatic balancing on the bq79616?

    Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: BQ79616 I was about to start the balancing with bq79616 evm, as soon is put evm in auto balancing mode, we read Bal_STAT register and this returns the INVALID_CBCONF flag set. As per the data…

  • BQ79616EVM-021: BQ79616EVM can't wake up by command sequence

    TI Thinks Resolved
    Part Number: BQ79616EVM-021 Other Parts Discussed in Thread: USB2ANY , BQ79616-Q1 , BQ79616 Hi,teams, I want to use BQAutoEval GUI to wake up BQ79616EVM. I click 【wake up】,【Auto adress】once,the BQ-EVM can wake up normally. And the address will pop up normally…

Didn't find what you are looking for? Post a new question.