Hello Yanming Luo,
I'm using BOOSTXL-3PHGANINV driver board and an encoder without index pin. I've converted the BEMF constant to V/Hz and still the motor is continuously vibrating. is this something related to motor parameters. is there any reference…
Part Number: TIDA-010062 Other Parts Discussed in Thread: TIDM-02013 Hi team,
While reviewing the TIDA-010062, the question arose on if the reference design could work with using only a single F280049C C2000.
Would that be possible?
I understand that the…
Muhammad Arsalan Athar said: Please suggest
I suggest you review some aspects of 'C' programming . Maybe start here:
https://www.cprogramming.com/tutorial/c/lesson7.html
Hi Jaehoon,
Since the only difference is the bytes of address, the main value to change is the EEPROM . NumOfAddrBytes to 1 and remove one of the ACKs. Everything else should be okay to stay the same though you might want to take a look at that LSB since…
Other Parts Discussed in Thread: TMS320F28379D , TMS320F28388D Which C2000 microcontroller currently stands out as the best choice for AI or RL-based motion control systems, having compatibility with Simulink AI or RL blocks?
Part Number: TMS320F280025C Other Parts Discussed in Thread: SYSCONFIG
Dear Sir,
I am using the syscfg for the DCL controller
Please suggest the procedure for updating the this PI controller:
The PI controller running in
interrupt void INT_myADCA_1_…
Part Number: TMS320F280025C Other Parts Discussed in Thread: SYSCONFIG , C2000WARE Dear sir,
I am trying to implement the PI controller in PSFB using syscfg as screenshot given below.
After adding the controller using syscfg , how to assign the reference…
Part Number: TAS2563 In the data sheet of the TAS2563 is a digital volume control setting explained, chapter 8.4.3.3, but the used bitfield DVC_PCM is not described, i.e. there is no address for that. Only the analogue amplifier can be controlled.
Part Number: TMS320F280025C Other Parts Discussed in Thread: TMS320F28027 , , CONTROLSUITE , C2000WARE , PMP23126 , TIDM-02000 , C2000WARE-DIGITALPOWER-SDK Dear sir,
I am migrating from TMS320F28027 to TMS320F280025C, and the old program uses the control suite…