Part Number: CC1021 Hi Guys,
Using the CC1021 in my current application. To my understanding this device is active and no worries from that perspective but I have understood that it might be a good idea to look into CC112x family as well. Are there…
Part Number: CC1021 Hi Support
I am searching for a part which will run at 1090Mhz and will perform OOK modulation
I have hunted around the set of standard parts, but cannot find anything, but I have a strong suspicion something is available, I am…
Other Parts Discussed in Thread: CC1021 , CC110L Hi,
I have to design a device that is able to communicate with a gateway. the gateway is already designed and is equipped with a CC1021.
Since CC110L requires less external components than CC1021 I…
Other Parts Discussed in Thread: CC1020 , CC1021 Dear Friends:
I had seup CC1020 for UART mode transmission. The receiver detect carrier. But what is very strange is that there is irrelevant data on DCLK which I have used as RX data even when transmitter…
Other Parts Discussed in Thread: CC1101 , CC1021 We have an old system based on CC1021 chipset whereas in the new devices we use CC1101.
We can set-up communication between two devices containg CC1101. But when we try receiving packets from the device…
Part Number: CC1020 Other Parts Discussed in Thread: CC1021 , , CC110L Tool/software: Hi engineers,
my customer want to know the difference between CC1020 and CC1021. also the difference between CC1020 and NCK2910. could you share some info?
I need an external ADC because the dynamic range requirements are high in the product. I would need 90-100dB dynamic range and the idea is to have an external LNA, put the TI receiver in low gain mode (high linearity) and use a 15-bit external ADC (1Mbps…
Hi Richard,
Thanks for your answers. We have a proprietary radio protocol that includes periodic transmissions, fixed size packets, and frequency hopping. Our application will need to listen to older TI transmitters like the CC1021. The functionality…
Data rate is 19.2 kBaud.
GFSK Deviation is 9.9 kHz
RX Bandwidth is 51.2 kHz
These are figures from our product that uses the CC1021/1070 radio transceivers. Our new products must be able to receive the same radio modulation format from existing…
Other Parts Discussed in Thread: CC1070 , CC1021 Hi
i have e device who use the CC1070 to transmit weather data to a receiver (who use CC1021): 902 to 928 mhz (the device is made for usa) xtal: 14.7-508.
I have the same device (but built for Europe…
