Part Number: CC1100E Other Parts Discussed in Thread: CC1100 , CC1101 ,
Hello,
We developed a system around 2007 with the CC1100 implemented. This units have passed the EN300220 test. Last year we finished a new version of the main unit.
During a…
Part Number: CC1100E Other Parts Discussed in Thread: SIMPLICITI , CC1100 Hi,
We are using the SimpliciTi protocol in Gateway - Node mode using cc1100(433 MHz) and MSP430.
There are 2 set of device, one communicating in channel 0 and other in 1. Channel…
Other Parts Discussed in Thread: MSP430F1611 , CC1100E , CC1100 Hi all,
I am attempting to interface an MSP430F1611 to a 950/960 MHz CC1100E, but I cannot get the pair to transmit properly.
On the transmitting side, I have a CC1100E evaluation module…
Other Parts Discussed in Thread: CC1101 , CC1120 , CC1100E Hello experts,
We would like to introduce CC112x(maybe CC1120) as a universal coordinator for two existing mature wireless networks founded by CC1101 (at 433MHz) or CC1100E (at 470MHz). Only…
Other Parts Discussed in Thread: CC1100E
Hi,
In cc1100e datasheet, there is a no preamble/sync detection mode. If preamble/syncword detection is disabled (MDMCFG2.SYNC_MODE=000), how can cc1100e domodulate the inputdata? Is there any body know how…
Other Parts Discussed in Thread: CC1100E , CC1120 , CC1101 Hello,
I read through ARIB STD T67 and I think the max RF output is 10mW for the 470MHz band. What power outputs have people achieved certification for with the CC1100E? I know the part can…
Other Parts Discussed in Thread: CC1100E Hi,
I have custom board with CC1100E as a transmitter. SPI communication works fine. According to the manual and SmartRF setting PKT_FORMAT=3 will turn GDO0 into a TX input. Do I need to configure anything else…
Part Number: CC1120 Other Parts Discussed in Thread: CC1100E , This is the register configuration generated by SmartRF Studio.
// Address Config = No address check
// Bit Rate = 1.2
// Carrier Frequency = 434.000000
// Deviation = 3.997803
…
