Part Number: CC1200EMK-868-930 Other Parts Discussed in Thread: CC1200 HI,
- I have Smart RF TrxEB module and CC1200 RF module from TI , I have installed the “Setup_SmartRF_Packet_Sniffer_2.18.1.exe “ .. and “Setup_SmartRF_Studio_6.13.1.exe”
- Now…
Part Number: CC1110EM868-915-RD
Hi,
I've designed my new PCB using the DN023 as a reference for the 915MHz PCB antenna.
The dimensions of the antenna are exactly the same. My ground plane is slightly bigger (35mmx46mm instead of 31x45). The PCB…
Part Number: CC1310 Hi!We are conducting transmission tests with the CC1310 in the frequency range of 915Mhz, and using RFExplorer measuring equipment we can measure this frequency (915Mhz) but a very low power, in the order of -85dBm. Adding the external…
Part Number: CC120XEM-868-930-RD Hi All,
The customer is asking questions about Post's comments below.
The figure below is a circuit diagram of the antenna part of CC1125EM_Cat1_schematic.pdf in the article.
1. Is it correct to replace…
Part Number: CC1310 I'm developing a proprietary board for the CC1310 and finding it dificult to decide which reference I should use for the matching circuit.
It is a 4-layer, 35 x 50 mm board with a CC1310 4x4, with a compact helical PCB antenna (showed…
Part Number: CC1310 Hello,
Can you please tell me at which frequency is the CC1310 launchpad's antenna better matched, 868 MHz or 915 MHz ? According to my measurements, there is a difference. Actually, one year ago, when I first bought the launchpad…
Other Parts Discussed in Thread: CC1120EMK-868-915 , CC1120 , CC1200 Hi,
Evaluation Kit "CC1120EMK-868-915"
Is this assessment of 920MHz is possible?
If you can not, please tell me the evaluation board can evaluate the 920MHz.
Best Regards…
Part Number: CC113L Hi,
Our customer use CC113L, and the frequece need 915MHz. Now refer CC113LEM 868/915 MHz Reference Design.
The question is how to change to 915MHz? Which 2 discrete component and change to what value?
By changing 2 discrete…
Part Number: CC1310 I am working on a CC1310 design using a SkyWorks 65364-21 FEM, and I am looking for any guidance on incorporating SAW filters on the receive side for additional preselect filtering. There are already ports on the FEM to include the…
Part Number: CC1101EM868-915_REFDES Hi,
I'm interested in using Inverted F antenna for 915MHz from design note DN023 or Miniature Helical PCB antenna in DN038. DN023 states that there is 'antenna.spl' file included in the CC1110EM IIFA Reference Design…
