Hi,
This is possible and please refer to SmartRF studio for the register settings.
Please start with the generic 868/915/920 MHz PHY for the Narrowband as shown below. This can be set to 924.650024 MHz and 924.699951 MHz.
This has a Rx bandwidth of 10 kHz…
Part Number: LAUNCHXL-CC1352P Other Parts Discussed in Thread: CC1352P Hi, TI team,
I am designing a product using CC1352P and wondering if the reference design is the same for different band of 433, 868 and 915 MHz?
I figure if the band is different…
Hi Satya,
This is due to the " RF Design Based On " selected. In the shared screenshot you have selected the LP_EM_CC1354P10_1
The LP-EM-CC1354P10-1 has the +20 dBm PA configured for 868/915 MHz operation. The LP-EM-CC1354P10-6 is configured for…
Hi,
It looks like you are using the reference design for 868/915 MHz - this will not work for the frequency band you are targeting.
Please use the reference design CC13xxEM-7XD-4251 (SWRC330): https://www.ti.com/lit/zip/swrc330
It is designed for the 433…
Other Parts Discussed in Thread: CC1120EMK-868-915 , CC1120 , CC1200 Hi,
Evaluation Kit "CC1120EMK-868-915"
Is this assessment of 920MHz is possible?
If you can not, please tell me the evaluation board can evaluate the 920MHz.
Best Regards,
…
Part Number: CC1101 Other Parts Discussed in Thread: CC110L , SMARTRFTRXEBK , CC1120 Team,
Customer is looking for evaluation card for both CC1101 and CC110L. The goal is to do some evaluation in the following band: Base freq. 867.999 Mhz, channel spacing…
3) For this you can refer to:
Section 2.2 of SWRA479 ( Achieving Optimum Radio Range ): https://www.ti.com/lit/swra479
Section 2.2.1 of SWRA496 ( CC-Antenna-DK2 and Antenna Measurements Summary ): https://www.ti.com/lit/swra496
Section 4.1 of SWRA328 ( DN031 - CC…
Other Parts Discussed in Thread: CC-ANTENNA-DK2 , CC1310 , CC1120 Tool/software: TI C/C++ Compiler Dear Sir,
CC1310-1190 launchpad has PCB antenna, which is an 868/915/920 MHz. instead of PCB antenna. I want to use a omnidirectional antenna. which has higher…
Hello Island,
The page you link to is for launchpads for CC1352P (not P7): https://www.ti.com/product/CC1352P
The launchpads for CC1352P7 are here: https://www.ti.com/tool/LP-CC1352P7
LP-CC1352P7-1: 868/915 MHz up to 20 dBm, 2.4 GHz up to 5 dBm
LP-CC1352P7…
Hi,
We have not developed or tested this beyond the information Richard shared in the thread you linked. As mentioned, the 433 MHz-band is typically more utilised at lower power levels as +20 dBm is not allowed in most regions, so we have not spent more…