Part Number: CC1121 Other Parts Discussed in Thread: CC1101 , , CC110L , CC1120 Hi all,
I have a compatibility problem between CC1101 (we use it from many years) and CC1121 (we would like to start using it because it has a better link budget). Of course…
Part Number: CC1121 I am looking at the documentation http://www.ti.com/lit/ds/symlink/cc1121.pdf
184.108.40.206 Configuration Software The CC1121 device can be configured using the SmartRF Studio software (SWRC046). The SmartRF Studio software is highly recommended…
Part Number: CC1121 Hi,
Have the following issue:
Our product is using 2 CC1121 radio's working on the same channel (frequency).
Our product is sending a beacon message every few mSec on Radio 2, while the other radio continue to RX.
In some scenario…
Part Number: CC1310 Other Parts Discussed in Thread: CC1121 ,
Can I ask whether the whitening of the CC1310 is compatible to CC1121's ?
In other words, is it possible to configure CC1310 whitening function the same as CC1121 ?
My customer has…
Part Number: CC1121 Other Parts Discussed in Thread: CC1120 HI,
Does anyone have experience with using the CC1121 with an integrated fornt end that has a differential output on the receive path - such as the Skyworks SKY66101?
I am considering this as…
Part Number: CC1121 Hi there,
I hope you might be able to help with a question I have regarding the current drawn by the cc1121 chip during TX..
I recently compared the TX current drawn from a PCB with a badly tuned antenna to that of a good one and noticed…
Part Number: CC1121 Hello ,
We have a working Radio, but have two outstanding issues :
1. We cannot get a RSSI value from the radio. So we cannot indicate if the two products are too far away or not.
2. Total signal strength is only -1.5dBm…
The only difference between CC1120 and CC1121 is the minimum bandwidth. Since the RX BW for 38.4 kbps is larger than the minimum bandwidth for CC1121 the 38.4 kbps setting for CC1120 is also optimal for CC1121.
Part Number: CC1121 Hello,
We have a problem with a number of our deployed systems.
Our system is comprised of end units, sending a status packet every 60 seconds and a hub, that replies to the status packet of the end units. Both the hub and the end…