Thank you for your answer.
I think we made a mistake in the previous question. We have a CC113L/ CC115L attached to one of the TrxEB boards. What we want to do is to make the board talk to the antenna and use the antenna to transfer and receive some…
Mikhail
EM430F6137RF900 is not supported by the Packet Sniffer.
The Packet Sniffer supports the following capturing devices
SmartRF04EB + CC2430EM|CC2431EM|CC2530EM|CC2510EM|CC1110EM SmartRF05EB + CC2430EM|CC2520EM|CC2530EM|CC2510EM|CC1110EM…
I think this may be what you are looking for:
http://www.ti.com/tool/packet-sniffer
It works with quite a few of the dev boards such as:
CC Debugger + SmartRFCCxx10TB SmartRF TrxEB + CC1120|CC1121|CC1125|CC1101|CC110L,CC113L SmartRF05EB + CC2430EM…
Other Parts Discussed in Thread: CC110L , CC1101 , CC1121 , CC1120 , CC113L Hi,
I have an application for a long distance (0.25 mi / 0.4km) outdoor link, but with very low data rate, and no power or space constraints. I'm assuming that I need 433 MHz…
The CC115L package is the same as CC113L, CC110L, and CC1101. The CC115L package is not the same as CC1150. Thus, CC115L HW (PCB) is not the same as for CC1150. The same software can be used for the two parts.
Hi,
Copy from the blog:
What are the differences between CC1101 and the Value Line parts?
The Value Line parts are based on CC1101 where the design has been optimized for cost to enable a lower price point. All Value Line parts are pin, register…
Other Parts Discussed in Thread: TEST2 Hi Sir;
The following configuration is my CC113 receiving board configuration, is that best sensitity? Thank you very much.
#define CHANNR_VALUE 0x01
#define ADDR_VALUE 0x55
#define FSCTRL1_VALUE 0x0F
#define…
The designed is very simple and we follow the EVB.
I have this design for few years and now I see that sometimes BLE failed to power up
The BLE power up was tested deeply on our hardware lab and It seems that 48Mhz crystal oscillator is failing to…
