Answered

• CC115L: alternative TX only to CC110L

  

  Adrian Ymeraj

  Resolved

  Part Number: CC115L Other Parts Discussed in Thread: CC110L , , CC113L Hello team, I understand that the CC115L is pin to pin compatible to CC110L. I would like to have confirmation of full HW, SW compatibility (clearly considering only the transmission…

  • Resolved

  • over 3 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CC115L: CC115L TX power setting on SRF for -6dBm

  

  Gary Lin

  TI Thinks Resolved

  Part Number: CC115L Hi Team, We like to have -6dBm TX power setting on SRF for cc115L, can you show us how to modify it? We need to setup this specific TX power for EMI/EMC testing!

  • over 3 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• CC115L: Protect CC115L proprietary configuration

  

  Daniel Fang

  Resolved

  Part Number: CC115L Hi In order to protect customer proprietary configuration. They don't want others can read out register setting especially sync word. Is there any method to protect this? Thanks.

  • Resolved

  • over 4 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• CC115L: Tolerance of output power highest setting and output power lowest setting

  

  Hirotaka Matsumoto

  Resolved

  Part Number: CC115L Hi all Would you mind if we ask CC115L? How much is the tolerance of output power highest setting and output power lowest setting? (We would like to know Min and Max value of these.) We assume that these value depend on setting, however…

  • Resolved

  • over 3 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• CC115L CRC setting

  

  Daniel Fang

  Resolved

  Part Number: CC115L Other Parts Discussed in Thread: MSP430G2453 Hi In order to compatible with Si4438 packet. How to set CC115L CRC as below format? Thanks a lot. 1. When enable Si4438 CRC, Si4438 can't receive packet from CC115L 2. Once disab…

  • Resolved

  • over 4 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• RE: CC115LEM-868-915-RD: Existence of CC115L Daughterboard for TrxEB Board

  

  TER

  Resolved

  I suspect that the CC115L kit is not sold anymore due to low volume. Have you looked at the spectrum from CC115L without decoding the data but with a low RBW?

  • over 3 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• CC115L: CC115L RunTx() in PER_TEST example

  

  Daniel Fang

  Resolved

  Part Number: CC115L Other Parts Discussed in Thread: CC113L , , CC1101 Hi 1. PER_TEST example. Move cc115LRunTX() to main() function. Receive it by SmartRF studio and CC113L EVM. It should has many times packet received. But it only receive one packet…

  • Resolved

  • over 5 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• CC115L: Frequency shift with some devices

  

  Joe Horanzy

  Resolved

  Part Number: CC115L Have product transmitting on 900 Mhz band with the CC115L. However, some devices are at a -40Khz shift while others are right on. After replace the CC115L with another one, the shift is gone. Note: There is no communication as the -40Khz…

  • Resolved

  • over 4 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• CC115L: CC115L lack of outout RF power

  

  crisgyorgus

  Resolved

  Part Number: CC115L Other Parts Discussed in Thread: CC113L I have problems with the CC115L transmitter. It lacks power on the output. I do not have a spectrum analizer to test it, so I do the testing with another CC113L to receive the data and measure…

  • Resolved

  • over 5 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CCS/CC1120: SmartRF configuration for 9.6kbps Bitrate between CC115L(TX) to CC1120(RX/TX)

  

  Yaniv Reibenbacg

  TI Thinks Resolved

  Part Number: CC1120 Other Parts Discussed in Thread: CC115L , Tool/software: Code Composer Studio Hello, We have a working product that uses 100kpbs, 4-FSK configuration (attached) between CC115L(TX) to CC1120(RX/TX). I require a configuration 9.6kbps…

  • over 4 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

Didn't find what you are looking for? Post a new question.