• CC1120EM-420-470-RD: no feedback on GPIO2 after STX command

  

  media lab

  TI Thinks Resolved

  Part Number: CC1120EM-420-470-RD I would like to porting driver to STM32 and found that will block on GPIO2 no response after STX command. I set "CC112X_SETTLING_CFG = 0x00B" and my partversion is 0x23 no run manual calibration. my initial register…

  • over 6 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• CC1120EM-420-470-RD: run CC1120 Tx/Rx test on STM32G071RB

  

  media lab

  Resolved

  Part Number: CC1120EM-420-470-RD Other Parts Discussed in Thread: CC1120 I've ported code to Arduino UNO and that can run Tx/Rx test successfully. I would like to porting firmware to STM32G071RB board and run the same initial register setting value…

  • Resolved

  • over 6 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CC1120EMK-420-470: generate the output of RSSI using GPIO (PWM, timer) in CC1120 Evaluation Module Kit with SmartRF Transceiver Evaluation Board

  

  Hyunjun Jung

  TI Thinks Resolved

  Part Number: CC1120EMK-420-470 Other Parts Discussed in Thread: CC1120 Hello, I am trying to use CC1120EMK-420-470 board to get the output of RSSI, using GPIO (PWM, timer) of MSP430 (smartRF transceiver board). smartRF transceiver board can read the…

  • over 5 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CC1120EM-420-470-RD: Differential input to pins 19,20 (LNA_N and LNA_P)

  

  Juhi Wani

  TI Thinks Resolved

  Part Number: CC1120EM-420-470-RD Other Parts Discussed in Thread: CC1120 Hi I wanted to ask whether there is any way in which I can directly connect a differential input from antenna to cc1120's LNA pins(19 and 20) without using the circuitry involved…

  • over 6 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CC1120EM-420-470-RD: Review design using helical antenna

  

  Sudesh Sheodass

  TI Thinks Resolved

  Part Number: CC1120EM-420-470-RD Other Parts Discussed in Thread: CC1120 We have a CC1120 design (433MHz band) on a new product using a helical antenna. 1. Can TI review our design (layout and schematic)? Do you normally do this? 2. Can TI provide…

  • over 7 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CC120XEM-420-470-RD: Boosterpack/Launchpad compatibility

  

  Igor Natachanny

  TI Thinks Resolved

  Part Number: CC120XEM-420-470-RD Other Parts Discussed in Thread: MSP430FR5994 Do I can to use MSP430FR5994 Launchpad with CCxxxxEM Adapter and CC120xEM?

  • over 8 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum
Answered

• CC1120EMK-420-470: Solder R321 by mistake

  

  Daniel Fang

  Resolved

  Part Number: CC1120EMK-420-470 Hi experts, My customer already makes a mistake that solders 0 Ohm resistor on R321. They use 3.3V TCXO. The product has been shipped out. Is there a potential risk? Thanks.

  • Resolved

  • over 8 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CC1120EMK-420-470: SmartRF Studio Default XML

  

  Zebryk

  Part Number: CC1120EMK-420-470 Hello, Is there some way to automatically load a specific XML configuration after launching and selecting an EB from SmartRF Studo? Such as appending an argument to the call: C:\Program Files (x86)\Texas Instruments…

  • over 9 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CC1120EM-420-470-RD: RX-SINGLE-ENDED-IMPEDANCE

  

  ricard castella

  Part Number: CC1120EM-420-470-RD Hi community, I'm designing a PCB with this fabulous transceiver and in his datasheet I've found a reference about the RX port can be used as single ended without balun, does is it possible ? And if is it possible…

  • over 9 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

• CC110L: Mass Production Testing and Output Power Values

  

  Babak Shadkanloo

  TI Thinks Resolved

  Part Number: CC110L Other Parts Discussed in Thread: CC1200EMK-420-470 Hello, I have a question regarding the mass production testing of the RF transceiver, CC110L. In the RF Transmit section of the datasheet, for the Output Power at the highest setting…

  • over 2 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

Didn't find what you are looking for? Post a new question.