Part Number: CC1312PSIP Other Parts Discussed in Thread: CC1312R , Tool/software: Hi,
I have a product based on the CC1312R. It is in full production and stable. The application is loosely based on the collector/sensor examples.
Can you please tell me…
Part Number: CC1312PSIP Dear support team,
I'm working with CC1312PSIP controller.
TI RTOS: simplelink_cc13xx_cc26xx_sdk_7_10_02_23
I would like to use this example: C:\ti\simplelink_cc13xx_cc26xx_sdk_7_10_02_23\examples\rtos\LP_EM_CC1312PSIP\drivers…
Part Number: CC1312PSIP
Sure, here’s a rephrased version of your text:
"In the CC1312 family, other devices provide the flexibility to power the VDDR_RF either from the internal LDO or from the DC/DC (external inductor). However, the datasheet…
Part Number: CC1312PSIP Tool/software: Hi Team 802.15.4,
My customer has the following questions..
I have been struggling with an issue related to the TI 15.4 protocol. I am trying to pair the devices up using the radio by removing the current device…
Hi Shlomo,
You could have a look at those instructions then:
They may allow you to save some power while minimizing latency:
On the Sensor Controller, we cannot really put constraints on that..
Regards,
Arthur
Part Number: CC1312PSIP Other Parts Discussed in Thread: SYSCONFIG Hi, I would like to test a voltage on analog input, when supplying an internal PU Measuring the input, there is no change in the voltage when I enable the internal Pull up. Any solution? …
Part Number: CC1312PSIP Other Parts Discussed in Thread: CC1312R I am going to use the Serial Bootloader with my board with CC1312PSIP
What are the dedicated DIO pins used for the UART and what are the instructions
(Is there updated SWRA466D document that…
Part Number: CC1312PSIP Other Parts Discussed in Thread: SYSCONFIG How do I use SysConfig to configure a board that is being designed without it showing reservations for LaunchPad hardware? I see I can supress the Connected to hardware, is that the preferred…
Part Number: CC1312PSIP I created a new project and copied over my code from a LaunchPad project. I tried to put into the Build Settings directories for finding files. However, there are so many and it seems that this shouldn't be necessary. For instance…
Hello
The problem was solved.
As it turns out, the functions that return gain and offset corrections (AUXADCGetAdjustmentGain(), AUXADCGetAdjustmentOffset()) were set to return parameters associated with fixed reference voltage rather than a relative reference…