Part Number: CC1352P Hi Sirs,
I am practing use UART to transformer 2Mbps data.
After practice, the UART maxim transformer speed is above 1Mbps.
It's not match CC1352P datasheet as below picture.
Could you provide any command to upgrade UART speed…
Part Number: CC1352P
Dear Sir,
We are unable to set the BLE RF transmit power on the CC1352P module using the HCICommand.HCI_EXT_SetTxPowerCmd() API.
We have verified our implementation, but the configured RF power does not appear to be applied…
Part Number: CC1352P Hi Sirs,
I am practicing use CC1352P4 to transfer data with 2MBps, and use GPIO to trasnfer data.
And use example code"host_test" and "simple_peripheral", to be host and device.
Is it avaible to use thoese two example "host_test…
Part Number: CC1352P Hi Sirs,
I need use CC1352P to transfer data rate with 2MB/s.
The code structure as below :
RX : RF → RF FIFO → DMA → SRAM buffer → App
TX : App → SRAM buffer → DMA → RF FIFO → RF
Could you advise the sample on SDK tool…
Part Number: CC1352P Other Parts Discussed in Thread: UNIFLASH , I installed flash programmer 2 ver 1.8.2 on win11 machine. After the connection of LAUNCHXL-CC1352p I get the following error:
Failed to generate board file for EB object during device…
Part Number: CC1352P Tool/software: Dear Team,
I am interfacing this sensor to ADC of CC1352P . Below is the pinout of ADC.I have two questions about connecting this sensor to ADC of CC1352P. 1)Can I connect the Signal Voltage pin (PIN 2) directly…
Part Number: CC1352P Tool/software: Dear Team,
Below is the block diagram of my system.
You can see that the TX is communicating with RX using Sub-1Ghz
Also you can see that in the RX side CC1352P is communicating with Mobile using BT.
My question…
Part Number: CC1352P Tool/software: Dear Team,
This is a continuation of this question ,which I asked earlier here.
In this project as I described in my previous question we will be connecting sensors to one of the TI CC1352P and from this data will…
Part Number: CC1352P HI Ti.
The power meter provided is not continuous. For instance, there is no measurement range from 5 to 14. And there are no -1, -2, -4, -7, etc. Are there any more continuous power meters available? Where can I obtain them?…
