The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: CC1352R Tool/software: Hi,
I am configuring a CC1352R using the PHY ID 132. This ID gives me the following specifications :
Data Rate: 200 kbps Channel 0 Feq: 902.4 MHz # of Channels: 64 Channel Spacing: 400 kHz.
With them in mind, I have two questions…
Hi,
If your battery voltage is 3.64V, then there will always be a certain loss due to PCB traces and ferrite bead components such as BLM18HE152SN1 that can have a DC resistance of 0.55 ohm_max. What is the voltage level when measured on the VDDS pads of…
Part Number: CC1352R Other Parts Discussed in Thread: SYSCONFIG , , CC1312R Tool/software: Hi everyone,
I'm working on a project where I need to establish communication between a CC1352 and a CC1312 using the 868 MHz band . To get started, I used the rfU…
Part Number: CC1352R Other Parts Discussed in Thread: CC1354R10 , Tool/software: Hello, I'm currently using the CC1352R1, and I would like to have more memory. Is the CC1354R10 pin compatible and FW compatible? Can I assemble it instead of my CC1352R1…
Part Number: LPSTK-CC1352R Tool/software: Hello E2E Experts,
Good day.
I was hoping to get access to the older SDK version that has the actual multi sensor code.
I need to reflash a LPSTK-CC1352R with the default firmware.
Can you point me to the older…
Part Number: CC1352R Tool/software: Hello,
i have an UART as callback and get Data with a python script over the serial interface. The Data will not be read in, it goes dirctly in the Error_policyMin.
Can someone explain me why?
C Code:
/* * ======== callbackFxn…
Part Number: CC1352R Tool/software: Hi,
“May I ask what the maximum supported symbol rate of the CC1352 is in WB-DSS mode? The default is 480K. In our SmartRF Studio tests, we raised the symbol rate to 800K and text transmission worked quite well. Since…
Part Number: CC1352R Other Parts Discussed in Thread: MIOTY , , SYSCONFIG
Tool/software:
Hello,
i want to communicate with my CC1352R Board to another CC1352R Board or an other device over Uart2 with hardware flow control. I use the sdk 5.30
Therefore…
Part Number: CC1352R Other Parts Discussed in Thread: MIOTY Tool/software: Hi TI Champs
Would like to know if there is any update for bidirectional communication support in MIOTY for CC1352, also any possibility to release the SDK for customers to build…
Hi Priya,
For steps on migrating from XDCtools to SysConfig, please see the section .cfg to .syscfg here:
https://dev.ti.com/tirex/content/simplelink_cc13xx_cc26xx_sdk_8_30_01_01/docs/proprietary-rf/proprietary-rf-users-guide/tirtos/bios7_migration.h…
