Part Number: CC2511 Other Parts Discussed in Thread: CC2531 , CC-DEBUGGER Tool/software: Hello all, I would like to ask for your help. I have a CC2511 USB dongle and I want to upload firmware to it. I connected the CC Debugger to it. Smart RF studio detects…
Part Number: CC2511 Other Parts Discussed in Thread: CC2510 Tool/software: I'm trying to write the usb_bootloader_srf05dbg.hex file to a CC2511F32 via an STM32. I found the sample code for a CC2510, swra410 Sample Code and I foolishly thought it would…
Part Number: CC2511 Tool/software: I'm getting started with trying to write the CC Debugger bootloader to a "bare" CC2511. I'm referencing the datasheet as well as swra124 and can't seem to get anything coming back from the CC2511. Steps I have taken…
Part Number: CC2511 Tool/software: Hello,
I am trying to design a PCB in KiCAD using the antenna described in application note 043. The application note reads "It is also recommended to use the same thickness and type of PCB material as used in the…
Part Number: CC2511 There are two CC2511 modules on hand, one serving as the sending end and the other as the receiving end. The sending end sends a data packet after receiving the data sent by the serial port. Now both the sending end's (RFTXRXIF) and…
Part Number: CC2511 We have a request from a customer to implement HID under USB 1.x. Our original product, using the libraries, creates a USB 2.0 interface. Is there a way to implement USB 1.x with the CC2511?
Part Number: CC2511 Hi,
I'm looking for the part specific header files "ioCC2510.h" and "ioCC2511.h". These are also used by swrc088c and swrc117, but where do I get them from?
Thanks,
Rene
Part Number: CC2511 Hi team,
In AN043 it's said that the PCB information can be found in a separate readme file in the reference design, but I can't find the reference design folder, can you link me to this file including the PCB information? thanks…
Part Number: CC2511 Hi，team:
The following is the code I initialized：
May I ask what is the configuration for using an external clock? I have a problem configuring the serial port baud rate to 115200 when using an external…
