Part Number: CC2531EMK
Hi,
I have a smart thermostat as end-device and I wanted to know If by changing the attribute via ZTool ( AF_DATA_REQUEST ) the change is only visual, or the thermostat actually opens the valve.
I saw that the there is…
Hi R.M.
Thanks for your answer.
I use ADS. 50 Ohms port is a Term port.
I had a mistake in the Conductivity copper stakcup param. Now is fixed to 5.8e7 Siemens/m (by default) and I have "better" results but still far away from AN043 results. I am…
Part Number: CC2531EMK
Hi,
I have a quick curiosity regarding zstack frames.
One of my end devices sends me this message when I move the knob
<RX>11:44:24.87 COM4 AF_INCOMING_MSG (0x4481)
GroupID: 0x0000
ClusterID: 0x0201
SrcAddr: 0x3448…
Part Number: CC2531EMK Other Parts Discussed in Thread: CC2531 , CC2530
Hi,
I was curious if TI is planning on upgrading the ZStack Firmware to be compatible with matter as well, or maybe releasing a new one.
Can the most common TI Dongle such…
Part Number: CC2531EMK Other Parts Discussed in Thread: Z-STACK Hi,
I have a question regarding ZStack 3.0.
In case of a power outage and the coordinator restarts and recovers the network ( via BDB Commands)
My end-device connected to it is…
Part Number: CC2531EMK Other Parts Discussed in Thread: CC2531 My CC2531EMK dongle has been flashed with some other Zigbee firmware and I would like to revert it back to the original CC2531EMK firmware that was originally installed. I have a CC debugger…
Part Number: CC2531EMK Other Parts Discussed in Thread: Z-STACK Hi,
So I sent an AF_DATA_REQUEST to read an attribute ( cluster ID = 0x0001, attributeID = 0x0021 -> getbatteryPercentage)
AF_DATA_REQUEST (0x2401)
DstAddr: 0x4F16
DestEndpoint…
Part Number: CC2531EMK Hi,
Is there any way to get the radio quality of a device?
I came up with an idea: Sending an AF_DATA_REQUEST to get an AF_INCOMING_MSG with the LQI field, which is the radio quality.
BR,
Luca Vetri
