Just to add a little bit to Eirik's reply:
1) The CC2591 required inductors (or T-lines) on the VDD supply pins. These have been integrated on CC2592, so only good decoupling (capacitance) is needed.
2) The disadvantage of stating an impedance is…
Part Number: CC2538EM-RD Other Parts Discussed in Thread: CC2538 , Z-STACK , CC2650 I'm using the CC2538EM board with SmartRF06 EB . I have 1 end device successfully connected to it. How do I make the UART data go straight to the USB?
We want to remove…
Srikanth Chundi1 said: 1. In my scenario the connectivity between our custom SoC & CC2538 is UART hence i would like to know whether i can program any of the GPIO pins as UART port? Or else specific set of pins i need to use ( pins 16, 17 as RxD & TxD…
1&2. Since your host is Linux, I would suggest you to check www.ti.com/.../CC2531EM-IOT-HOME-GATEWAY-RD
3. It supposes to work on both CC2530 and CC2538.
1&2. Since your host is Linux, I would suggest you to check www.ti.com/.../CC2531EM-IOT-HOME-GATEWAY-RD
3. It supposes to work on both CC2530 and CC2538.
Other Parts Discussed in Thread: CC2530 , CC2531 , CC2538 , CC2531EM-IOT-HOME-GATEWAY-RD , Z-STACK , CC-DEBUGGER , CC2531EMK Hello,
We want to add several home automation applications in our project, for that I have some questions to "Texas Instruments…
Other Parts Discussed in Thread: CC2538 Hi All,
I have few doubts on CC2538 Schematic and Bill of Material provided by Texas instruments.
Referring to Schematic of CC2538 Antenna A1 is not mention in Bill of materials.If we fabricate the same board…
Other Parts Discussed in Thread: CC2538 Hi,
I am planning to use the CC2538EM Reference Design for one of my projects. In the BOM and schematic available on the following link:
http://www.ti.com/tool/cc2538em-rd
the part number of the wireless…
Other Parts Discussed in Thread: CC2538 , CC2538EM-RD Hello,
I have the following questions for CC2538.
1. Let me know the rule of the slope time for the input voltage (DVDD and DVDD_USB).
2. Is there a sequence of RESET_N and the voltage input…
Part Number: CC2650EM-7ID-RD Other Parts Discussed in Thread: Z-STACK , CC2650 , CC2538 Hi
In Detail explanation and How to set ZED using Z Tool command
1. I have XBee-S2C module from Digi international whose setting as below screen shot (support…
