Part Number: CC2538 Other Parts Discussed in Thread: CC2650 , , Z-STACK I try to get some CPU information from IAR when cc2650 hang-up.
If need more information to debug this issue , please let me know what debug information I can provide.
Question…
Hi Tisa,
Have you evaluated TI's Z-Stack Linux Home Automation Gateway reference design ( http://www.ti.com/tool/cc2531em-iot-home-gateway-rd )? It is based on CC2530/1, but provide full Linux support that includes an easy to use OTA server. Depending…
Part Number: CC2650 Other Parts Discussed in Thread: , CC2630 , CC2538
Hi, 1) I currently have a cc2650 chip , so could I just apply one of the pcb design files which are on TI website and start using it? (I am looking forward to use CC2650EM-7ID design…
Hi Marc,
I cannot answer all of your questions, but maybe I can shed light on some of them.
Marc Wahalla said: 1) Can someone verify the above connection please? Your connection looks like a subset of the TI 14-pin JTAG header. CC2538 supports 2-pin…
Hi,
The spectrum looks normal in Zero Span for Freq hopping mode. Those spurs show up because of the RBW setting of the Spectrum Analyzer. This is not a valid test for testing FCC band edge requirement.
For FCC band edge measurements, you can transmit…
Other Parts Discussed in Thread: CC2530 , Z-STACK , CC2530EMK , CC2538 , CC2531EM-IOT-HOME-GATEWAY-RD , MSP430F5529 Hi all,
I have to implement a HA coordinator for controlling endpoints (On/Off actuators) inside home automation environments. The…
Rob,
An update on this:
Most of our LPRF products will have footprints and symbols provided through a 3 rd party tool called Ultra Librarian Reader. For CC2530 this already exists ( http://www.ti.com/product/cc2530#cadsymfoot ) and it has been ordered…
Part Number: CC2538 Tool/software: Hi team,
My customer would like to ask about the SPI.
The cc2538 is used as a slave for SPI communication, but there is a problem when communicating at 5MHz.
The attached User’s Guide does not seem to describe…
Hi,
No, it requires a Balun.
Please refer to Section-5 of the Data sheet on how to use CC2592 in a Single-Ended mode by using a Balun?
Attached is the CC2592 Data sheet for your ready reference.
cc2592.pdf
Thanks,
PM
Hi
I am using CC2538-CC2592, and SmartRF06 Evaluation Boards; but when I power up my evaluation boards: is not showing up on the display. I am interested to get the path for the firmware that was loaded from factory for CC2538-CC2592. I programmed my…
