Part Number: CC2538EMK Other Parts Discussed in Thread: CC2538 , SMARTRF06EBK , SMARTRFTM-STUDIO Hello,
I have a CC2538 development kit, when I try to use it in windows laptop using the USB cable that came with the kit. The SmartRF studio 7 always gives…
Part Number: CC2538EMK Other Parts Discussed in Thread: CC2538 , , Z-STACK I am trying to decrease the receiver sensitivity of a node. Ryan Brown1 suggested here that I focus on the CCA threshold to be able to do it. But the problem is that even when I set the…
Part Number: CC2538EMK Other Parts Discussed in Thread: CC2538 , Z-STACK Hello,
I am trying to decrease the RX sensitivity of the CC2538EMK module (of the CC2538DK), in one of the RIOT-OS examples. I have set the RF power to the minimum (-24) to decrease…
HI Ryan, Sorry for the late reply.
Please find my interpretation below and correct me if I am wrong.
1. CC2538 OTA dongle example works with UART alone. 2. CC2538EMK has only USB 3. To access the UART of CC2538EMK, we need SMARTRF board.
Kindly clarify the…
Part Number: CC2538EMK Other Parts Discussed in Thread: CC2538 I have got 12 CC2538EMs and when I plug the CC2538EM into the SmartRF06EB, I can see some info on the LCD and the power indicator will light on. But one CC2538EM doesn't work at all when I got it…
Part Number: CC2538EMK Hi,
When using the SMA connector and external antenna rather than the PCB antenna on the CC2538EM (swrr113.zip - Schematic & BOM). Do we lift L375 and place it on L374 to use the external SMA antenna or is their a different value…
Hi Haines,
Please first confirm that you have followed all steps in the Zigbee_3_0_Linux_Gateway_1_0_1\Documents\Z-Stack Linux Gateway - Quick Start Guide & User's Guide. Everything appears to be correct from the Local Gateway Sample Application…
Part Number: CC2538EMK
Dear Sir/Madam,
One of my customer is using CC2538EMK as reference to design their end product. Now send for certification with TUV, but failed at conduct emission of one of the FCC15 standard. Any help can be extended on this…
Yes, as the CC2538EMK does not have a XDS100v3 debug probe. This is provided by the SMARTRF06EBK and the direct CC2538EMK connection is for USB peripheral interfaces, you can download CC2538-SW for more information and examples.
Regards, Ryan
Hi Nestor,
As TI does not develop or maintain this software, please reach out to the Contiki community .
Edit: Have you evaluated the CC2538DK ( SMARTRF06EBK + CC2538EMK ) RF performance previously, either with Smart RF Studio 7 or other stack embedded firmware…