Hi Vishnu,
This unfortunately isn't my expertise so I am reaching out to the hardware team for more info. Did your design get approved by our hardware team by a design review? If not could you submit a request for one.
you can find the link to it…
Hi Vishnu,
When running the test, I didnt have access to the test port of the CC2564C EVM thus the test did not pass, however, this has nothing to do with the HCI commands needed to run the tests. I can try to get some new hardware to get access, but…
Part Number: CC2564C
Hi,
I am using Panasonic PAN1326C2 bluetooth module in a design which in turn uses the CC2564C IC from TI. I am using 3.3V for CL1.5_LDO_IN and 1.8V for VDD_IO and MLDO. My design has a situation where the 3.3V rail can get disabled…
Part Number: CC2564C We are pursuing FCC and BQB certification, and as part of the procedure, we need to be familiar with the fixed frequency guidelines and understand the fixed frequency commands
Part Number: CC2564C Hello,
I have an A3DP Sink set up in the CC2564C at 48000 sample rate. Every 24 hours, 51 minutes and 18 seconds I get some weird behavior - sometimes the connection drops, sometimes the audio gets garbled, sometimes it just sort…
Part Number: CC2564C I'm currently working with the Bluetopia stack, particularly focusing on the CC2564C module. My query revolves around the possibility of sending SMS messages (text messages) directly from a connected mobile phone via Bluetooth.…
Hi Daniel,
We are using Bluetopia Stack with STM32 MCU. we are using the 5.1 Version of the stack.
D-Parameter refers to Desco.
8.6.3 eSCO The eSCO logical transport is established by the master sending an eSCO setup message via the LM protocol. This message…