Part Number: CC2564MODN Other Parts Discussed in Thread: WL1837MOD Hi,
customer has the following questions:
1. Customer has starting porting BlueZ to their Linux platform which also includes back porting the TI shared-transport component and WL18xx…
Part Number: CC2564MODN Other Parts Discussed in Thread: CC2564 Dear all,
I have got a question from my customer, if it is possible to communicate reliably to a device which does not have AFH enabled?
As background to this question:
New CC2564MODN based…
Part Number: CC2564MODN Other Parts Discussed in Thread: WL1831 , WL1835 , CC2564C Hello, we are using the CC2564MODN and WL1831, which are connected via PCM. A headset is connected to the WL1831 via Bluetooth and a mobile phone is connected to the CC2564MODN…
Part Number: CC2564MODN HI,
I need to connect to GNSS profile using Bluetopia, (Bluetopia 1.2 R2)
The GNSS profile is based on SPP profile:
https://www.bluetooth.com/specifications/profiles-overview/
Basically the problem comes down to be able to use…
Part Number: CC2564MODN Hi, I am trying to increase the baud rate of UART between the CC2564MODN and a STM32L4 with Bluetopia stack. Device Chipset: 4.1 BTPS Version : 4.0.2.2 Project Type : 6 FW Version : 7.41 The vendor specific command VS_Update_UART_Baur_Rate…
Part Number: CC2564MODN Tool/software: Linux Hi,
I am working with IMX6ULL connect to CC2564MODN through UART. I have 'protocol not suppoted' problem.
My Bluz version is : v5.49.
what is correct hciattach command ?
when I write :
hciattach -t 30…
Part Number: CC2564MODN Tool/software: TI C/C++ Compiler Hi ,
there is someone that has test this configuration using the Bluez stack : (CC2564MODN connect to UBUNTU PC through UART) ?
What document can I follow ?
Sergio.
Part Number: CC2564MODN Hi team,
my customer is using the CC2564MODN for a mobile radio. they are trying to test audio connection between their radio and some AirPod Pros to start. they just need a simple way of establishing and maintaining a two-way…
Part Number: CC2564MODN Is there any commands available to change the power level of CC2564MODN module in its BLE mode of operation ?. In operating manuals it is given as fixed power, but for the compliance certification testing of the product the BLE…
Are you implying the 1 BCLK delay for channel 1 may also not be needed?
I can confirm the documentation regarding Channel 2 does not appear to be accurate. Setting the CC2564MODN as master to a 16-bit, 16BCLK per channel config with a clock rate of 1024kHz…
