Part Number: CC256XCQFN-EM Hi Experts, I would like to ask whether the standalone CC256XCQFN‑EM board can use the RX, TX, CTS, and RTS pins on the RF1 and RF2 connectors to connect externally to an ARM board for debugging. Regards, Josel
Part Number: CC256XQFNEM Other Parts Discussed in Thread: CC256XCQFN-EM , CC3200 , CC2564C , CC2640 , MSP430F5529 , MSP-EXP430F5529LP , MSP430F5438A Tool/software: HI,
I have following boards
1.msp-exp30f5529LP ,
2.EmAdapter Booster Pack ,
3…
Hi Alexis:
I appreciate your message.
My configuration is CC256xCQFN-EM + SN93700 (Video SoC of SONiX).
BTW, I've got 2 more CC256xCQFN-EM modules, and they work so fine.
Thus, I think it's obviously a hardware issue.
Thanks.
Nick
Part Number: CC256XCQFN-EM Other Parts Discussed in Thread: CC3200
Hello,
I try to connect a CC256xCQFN-EM stacked on an MSP432 and extended with a CC3200 AUDIO BOSTERPACK with a car-unit. I use the "HFP Demo Ag" code and my boards are connected like…
Part Number: CC256XCQFN-EM Other Parts Discussed in Thread: CC2564 Hi team,
I have a customer that cannot connect CC256X EVAL KIT to the CMW500 directly through RF cables:
Could you confirm if this KIT only requires 3.3 V at VBAT ?
Could you confirm…
Part Number: CC256XCQFN-EM Hi,
What adapters can I use for the EM connectors of the CC256XCQFFN-EM eval board to be able use standard wiring cables (2,54 mm) or anything of the like ?
I downloaded the eval board BOM but coudn't find the connector…
Part Number: MSP-EXP432P401R Other Parts Discussed in Thread: CC256XCQFN-EM , BOOST-CCEMADAPTER , UNIFLASH Tool/software: Code Composer Studio My project use MSP430 test fixture + CC256xCQFN-EM boards to tune RF parameters serval years before.
it used…
Part Number: CC256XCQFN-EM Hi Team,
While going through the hardware design of the cc256xc qfnem module , we observed that BPF is placed in reverse direction(input of BPF is towards the antenna side), which is against the data's in the design files…
Part Number: CC256XCQFN-EM Other Parts Discussed in Thread: 4428 Hello, I have a question regarding CC256XCQFN-EM demo application code: My current setup configuration is STM3240G-EVAL with adapter-board and TI CC256XCQFN-EM board. I merged the following…
Thank you for your answer Travis.
1) I did indeed see in the CC2564C datasheet that the nSHUTD required a very specific sequence, but I thought that the CC256xCQFN-EM eval board was taking care of it internally, with nSHUTD pin powered.
2) Where can…
