Other Parts Discussed in Thread: CC2570 Hi,
I have a question regarding the datasheet for the CC2570. I am looking at the current consumption at 0dBm I = 28.8mA. Is this a constant current draw while the channel is open and transmitting or a peak draw…
Other Parts Discussed in Thread: CC2570 Hi, I am trying to change chip solutions from the NRF24AP2 to the CC2570. I am using the same low level serial functions in byte sync mode that I had successfully used with the NRF24AP2, but am not having the same…
Other Parts Discussed in Thread: CC2570 Hi,
I am looking at the CC2570 vs the Nordic AP2. The Nordic chip can synthesize the 32K Hz clock from the external 16 MHz clock, is this possible with the CC2570 or is the 32k Hz crystal required. If it is possible…
Hi,
I would recommend to look into https://www.ti.com/lit/slyb168
Additionally, you may want to review CC2570 and CC2571.
I hope this will help,
Best regards,
Other Parts Discussed in Thread: CC2571 , CC2570 How many devices can be connected (wirelessly) to the CC2570 and how many to the CC2571? For example let's say I am wearing both a heart monitor strap and an accelerometer. My understanding of the CC2570…
Other Parts Discussed in Thread: CC2570 Hi!
I am looking for CC2570 reference design. There are schematics in datasheet SWRS095A without values.
Is it possible to use reference design from similar product? Any suggestions?
Thanks! Marko
Other Parts Discussed in Thread: CC2571 Hi all,
I'm about to implement ANT RF communication by using SPI bus byte-sync communication between an MCU and CC2571 ANT Chip.
Could not find any code example, sometimes called firmware reference design,…
Other Parts Discussed in Thread: CC2570 Hello everybody I am developing an ANT+ HRM receiver using CC2570 chip from TI working in asynchronous serial interface. To make de PCB, I followed SWRS095A datasheet (page 13): http://www.ti.com/lit/ds/swrs095a/swrs095a…
Other Parts Discussed in Thread: CC2571 , CC2570
In my project the range has a significant importance.
The location is very isolated RF wise , there is a direct line of sight, the maximum transmission power can be used(4DBM)
as well as the lowest baud…