Part Number: CC2651R3 I am using TI OAD to update the firmware on a CC2651R3. After the update, I need the device to restart and run the new image. My board is running on batteries. I have run into two issues.
Issue 1: Processor requires hard reset before…
Part Number: CC2651R3 Other Parts Discussed in Thread: CC2652RB , Hi,
We are developing a new Bluetooth product using CC2651R3 and CC2652RB chips from TI. I want to know about whether crypto hardware's and algorithms used in these chips are certified, if…
Part Number: CC2651R3 Other Parts Discussed in Thread: UNIFLASH , Hello Guys,
I was looking for a way to flash the CC2651R3SIPA using the serial port (custom hardware). But in the UniFlash tool, for the components from the CC2651R3 family, the option…
Part Number: CC2651R3 Hi geeks,
I use CC2651R3 chipset for my project which is based on BLE SDK 6.20 and using TI Clang V2.1.2.LTS compiler. We use Code composer studio for development.
Now we have a requirement to implement unit testing for the project…
Part Number: CC2651R3 Hi geeks,
I use CC2651R3 custom developed board for my project which is based on BLE SDK 6.20.
Recently I started facing GATT ERROR (0x85) when i tested my simple_peripheral example code integrated with OAD.
We observe it sporadically…
Part Number: CC2651R3 Other Parts Discussed in Thread: CC2651P3 , , SYSCONFIG , CC2538 , LP-CC2652R7 I have a custom board with the CC2651R3 and I'm trying to get it to work some how. I took the rfListenBeforeTalk_LP_CC2651P3_nortos_ticlang example and…
Hi Jan,
Jan said: My apologies, since we are using a ticlang project, the objects end in .o. Can you try using the following SECTION code instead and trying again?
Yes I know, we tried it using .o file itself still we don't see the allocation in GPRAM…
Part Number: CC2651R3 Other Parts Discussed in Thread: CC2650 , CC2652R , SIMPLELINK-CC13XX-CC26XX-SDK , , LP-CC2651P3 Does the CC2651 have the exact same RF modem as the CC2650 and CC2652?
Part Number: CC2651R3 Hi Team,
Good day. I am posting this inquiry on behalf of the customer.
I'm designing a board using the CC2651R3SIPA module. I'm trying to use the UART pins for bootloading. however, the reference design for the dev kit and the technical…
Hi Jan,
Ddnr said: We observed similar situation in the simple peripheral example source, ie 36 packets out of total advertisement packets (already advertisement interval configured to 1second) are 2seconds packets.
As I mentioned above it is the simple_peripheral…