Part Number: CC2652P7 Other Parts Discussed in Thread: SYSCONFIG , Z-STACK Tool/software: Hello,
I am currently developing software on the CC1352P7-1 LaunchPad, and I would like to migrate the SysConfig settings to a custom board based on the CC2652P7…
Hi Kumaravel,
Here is a full write-up for the CC2652P7 +20 dBm workaround which you can follow:
https://e2e.ti.com/f/1/t/1274602 https://e2e.ti.com/f/1/t/1268628
The CC2652PSIP datasheet clarifies that this device has a maximum of +10 dBm output…
Part Number: CC2652P7 Hi,
Is there any reference design that shows 20 dBm section with external Balun or IPC circuit. I saw the application notes for Lower power output and +10 dBm output power like swra629a, swra729, and swra640g.
Could you please…
Part Number: CC2652P7 Other Parts Discussed in Thread: CC2652P
Hi team,
smartRF studio version： 2.24
The customer used smartRF studio to test output power of CC2652P7,and he found that the Tx power output of 20dBm is only -6dBm.
It is normal…
Part Number: CC2651P3 Other Parts Discussed in Thread: CC2652P7 Tool/software: Hi Sir/Madam,
I am Confused on chooseing a MCU under CC26xx series in which I am working on Proprietary RF for 20 dBm output. Please suggest me a MCU that work with Proprietary…
Hello Jonathan,
For context I am using the 8_30_01_01 CC13xx and CC26xx for my example. I imported the simple_peripheral_oad_onchip...CC1352P7_4 project, and looking at the settings of the BLE stack it does max out at 10 dBm, and I could build the project…
Hi,
FYI
The LP-CC2652R7 evaluation kit does not support a power amplifier (PA).
The LP-CC1352P7-4 evaluation kit supports a PA, providing +10 dBm for the Tx path. However, components need to be changed to achieve +20 dBm for the Tx path.
The…
Hi Eujean,
The Murata part number LFB18245BGEF296 is correct. Murata does not list all part numbers via their website or distribution. You should reach out directly to them. I am attaching the datasheet for the part number as reference.
Thanks,
…
Hi Jerry,
1. Use the LP-CC1354P7-4 and be aware that you would need to modify the output PA path for optimal +20 dBm operation (you could refer to a +20 dBm-enabled LP hardware design) since the 7-4 LaunchPad is intended for +10 dBm maximum. Please…
Hello Reed,
I hope you are doing well, is this for a launchpad or custom hardware?
1. Is this for the +20 dBm case or another dBm setting? if it is for the +20 dBm case we can see that the values provided in the .xlsx fit within the "typical" test…
