Hi,
We need some pieces of information to better diagnose this:
Are you using SmartRF Studio 7 for initial testing?
Are you able to do a PER vs Input Level test across the dynamic range of the device (sweep from roughly -110 dBm to -20 dBm) and…
Yes
The FCC certification is only valid for 915 MHz ISM band but the SIP can still be used for 868 MHz.
Just use the the external LC filter whilst operating at 20 dBm 869 MHz. This LC filter is included on the LaunchPad design for customers requiring…
Hello Alec,
Thank you for your response
So is that the case that the PGA870EVM has an expected gain of -31.5 dB to 0 dB? Does this mean that if you input a -20 dBm RF signal into the IN+ port of the PGA870EVM , you can expect the RF signal at the…
Please ask your TCB the question I asked above regarding whether keeping power below 19 dBm would eliminate the need for SAR testing if distance from antenna to human body is kept greater than 1 cm (not 20 cm), according to FCC OET document "447498 D01…
Part Number: CC1310 Other Parts Discussed in Thread: CC1190 , CC1350 , CC1312R , SYSCONFIG Tool/software: Hello, Ti's Friends
Our product Use the "CC1310" and "CC1312", now we need more RF Power to 20dBm.
We find a solution "Application Report SWRA528…
Part Number: TRF3765 Tool/software: I am using TRF3765 PLL for LO generation for frequency of 2.4GHz and 3.2GHz by giving reference clock at 40MHz internally . As per datasheet , the output should be around +6 dBm . but I am getting LO output at very…
Hi Juan,
I am looking at the BeagleConnect schematics and I think I may see some issues there.
On the ns_br firmware, in the SysConfig file, can you change the output power to 10 dBm, if it is already at 20 dBm? Do the opposite if the power is not…
Hi Stuart,
Stuart Baker said: Customer is wanting to know the impact of PA output power as the battery discharges and voltage degrades.
Unfortunately, 20 dBm PA output power vs VDDS plot was not included in the CC1354P10 datasheet. I'll check with…
