Part Number: LP-CC2652RB Tool/software: Hi, I am trying to transmit BLE data at particular channel by instructing the controller directly. I see that technical manual mentions that there is generic command to receive operation ` CMD_BLE_GENERIC_RX or…
Part Number: LP-CC2652RB Other Parts Discussed in Thread: SYSCONFIG , , CC2652RB Tool/software:
I am using the LP-CC2652RB Launchpad to develop a BLE device. I am using CCS 12.8.0.00012 with Simplelink SDK 7.41.0.17 and SysConfig 1.18.1. I am using TI…
Part Number: CC2652RB Tool/software: Hello. I have a Zigbee temperature sensor end device and have been encountering communication issues which I assume might be resolved with a board reset.
The issue: the board would randomly disconnect from the coordinator…
Part Number: LP-CC2652RB Other Parts Discussed in Thread: UNIFLASH , , CC2650
Tool/software:
I tried using UniFlash 8.8.0.4946 to flash the LP-CC2652RB to the RF sniffer firmware provided in the RF Sniffer 2 package. The first thing it did is require that…
Part Number: LP-CC2652RB Other Parts Discussed in Thread: CC2652RB Tool/software: hey there, I am back to this party after a longer break.. this was the original thread: https://e2e.ti.com/support/wireless-connectivity/zigbee-thread-group/zigbee-and-thread…
Hi Jeno,
No, compliance can't be evaluated at the IC level. Only at the module or system level. At the system level we have a Declaration of Conformance for the LaunchPad evaluation kit which uses the CC2652RB - https://www.ti.com/lit/pdf/sszqmz7
…
Part Number: LP-CC2652RB Tool/software: Hello. I am trying to capture some reporting times configurations to efficiently sample sensors and i seem to have troubles parsing these messages.
I have defined ZCL_REPORT , defined a function for ZCL_CMD_CON…
Part Number: LP-CC2652RB Tool/software: Can the "Socket" communications in the Smart RF Sniffer be used to send BLE sniffer data to a device with generic TCP socket communications? For example: an industrial PLC with Ethernet. If so, does the device…
Part Number: CC2652RB Tool/software: Hi, I am considering CC2652RB for a new design - a key question/ requirement that I need to answer it's in regard to 8-bit DAC, programmable current source capability. As far as I can tell - this DAC, Prog. current…
Part Number: CC2652RB Other Parts Discussed in Thread: SYSCONFIG , CC2652R As the related post described, SmartRF Studio seems to use the wrong clock for CC2652RB, leading to a unexpected large frequency shift in continuous Tx mode.
Sorry for the delay…