Part Number: CC2674R10 Tool/software: Hi,
Where can I get the ECG_Patch_Design_File firmware? According to the TIDA-010270 Design Guide page 22 to download the design files. I downloaded all the design files and I did not see any firmware in it.
-kel …
Part Number: CC2674R10 Other Parts Discussed in Thread: CC2340R5 , , ENERGYTRACE Tool/software: Hi team,
My customer is evaluating CC2674R10. They would like to do power estimator. However, on CC2674R10 webpage, there is no "Power Estimator" tool. For…
Part Number: CC2674R10 Other Parts Discussed in Thread: CC1354P10 Tool/software: Hi TI Team,
Example: mcuboot_LP_EM_CC1354P10_1_nortos_ticlang SDK: simplelink_cc13xx_cc26xx_sdk_7_41_00_17
Using the bootloader example compiled with -O0 and EXCLUDE_TRACE…
Part Number: CC2674R10 Tool/software: I'm working with a customer, who in turn is working with a test house that has raised some questions about the qualification of their product based on our device:
As discussed earlier today, I created the test…
Hi Jan,
We use the CC2674R10 on an custom PCB. So we did some HW abstraction based changes in SysCfg. The OAD scheme was untouched, just taken from the example.
If you compare the OAD_AddService() implementation from basic_ble_oad_offchip_LP_EM_CC1354P10_1_tirtos7_ticlang…
Part Number: CC2674R10 Tool/software: Hi all,
we are using simplelink_cc13xx_cc26xx_sdk_7_40_00_77 for a CC2674R10. A 320x240 TFT is connected via SPI. To drive it, wie use TI/grlib from the SDK. Everything works as intended.
But now we need a larger…
Part Number: CC2674R10 Other Parts Discussed in Thread: CC2674P10 , Tool/software: Hi Team,
Plesae help to check if 2450BM14G0011 Balun can be used for CC2674R10 / CC2674P10.
If OK, please also help to check if the SWRA572 can also be referenced for CC2674…
Hello Joey,
Please help me confirm the following so that I know we are on the same page:
When you conducted tests on other chip-based modules such as CC2674P10, CC1354R10, and CC1354P10 without encountering any issues, was this done with the same Lite…
Part Number: CC2674R10 Tool/software: We are seeing issues, when the UART serial cable is not attached, with the UART Rx pin. In this case, the pin is left floating, and appears to receive duplicated Tx data.
From Hardware Team: The Rx pin appears to…
Part Number: CC2674R10 It appears the watchdog doesn't fire in a faulted scenario (e.g. faultISR() ). Assuming the interrupts are disabled at this point, hence the timer not triggering? We'd like to avoid modifying the startup code with custom fault…
