Part Number: CC3200AUDBOOST Other Parts Discussed in Thread: CC3200 Hello!
I am using the CC3200 Launchpad and Audio boost pack to run the wifi_audio_app and I'm trying to get the Loopback mode to work. Is there anything special I need to do with the audio…
Part Number: LAUNCHXL-CC26X2R1 Hi
We would like add the MCLK speed to 4MHz, could you help provide the audio setting for 8kHz sampling frequency with MCLK as clock input (MCLK frequency is 4 MHz)?
case 8000: // Fs = 8kHz, MCLK = input to PLL, MCLK =…
Part Number: CC3200AUDBOOST Hi Vincent,
In the udp_socket example, Udp client is the device that sends data out to a server. The Udp server receives data from a client. Is my understanding correct here?
Who is the udp client in the wifi_audio_app? and…
Part Number: CC3200AUDBOOST Hi Vincent,
Is my understanding correct here?
In the wifi_audio_app mDNS advertiser is the speaker device which advertises with the service " CC3200 ._audio._udp.local." Then the MIC side uses sl_NetAppDnsGetHostByS…
Part Number: CC3200AUDBOOST Other Parts Discussed in Thread: CC3200 Hi Vince,
Thanks for your prompt reply.
This is what I am trying to do. I don't have any ideas on mixing the audio. Please see the following question.
So there is no issue for the…
Part Number: CC3200AUDBOOST Other Parts Discussed in Thread: CC3200 Hi Vincent,
I have been exploring the wifi_audio_app source code. The following code snippet looks like what detects the hosts (2 x streaming devices) in the network. In my case I will…
Part Number: CC3200AUDBOOST Other Parts Discussed in Thread: CC3200 Hi,
I am planning to use CC3200LAUNCHXL+CC3200AUDBOOST for one of the wireless audio applications.
can it support below points?
Broadcast UDP packets in AP (Access Point) mode to at…
Part Number: CC3200AUDBOOST Other Parts Discussed in Thread: TPA2012D2 , TLV320AIC3254 , , TPA2012D2EVM Hi,
I was trying the wifi audio example and was able to transmit my audio data from one board to other. But the problem is when I tried with the 1kHz…
Part Number: CC3200AUDBOOST Hi,
It may not answer exactly your question but if you want to get audio in and out of the TM4C123 Launchpad have a look at the 'Example Programs for TM4C123 and WM8731 using MDK-ARM' resource here* - the code implements I2S…
Part Number: CC3200AUDBOOST Other Parts Discussed in Thread: CC3200-LAUNCHXL , CC3200 Hi All,
I am struggling to figure out if CC3200AUDBOOST allows me to implement the following system.
Lets say I have the following.
3 x CC3200AUSBOOST boards
3 x CC3200…
