Part Number: CC3235MODASF Tool/software: Hello.
I'd like to use UARTLOAD mode for firmware update. I understood to transit Boot Mode by SoP port setting on datasheet CC3235MODASF.
Let's me know the below for how to use. - Assigned port for UART…
Part Number: CC3235MODASF Other Parts Discussed in Thread: CC3235SF
Tool/software:
Hi,
I am working on implementing the AES-CCM algorithm in CC3235SF. I am not sure how to configure the nonce and the MAC size in the CryptoCC32XX_AesParams. What is the…
Part Number: CC3235MODASF Tool/software: Hi, My customer is asking if WPS connection can be done only 5GHz band. According to datasheet, WiFi direct is only supported on 2.4GHz. As WiFi Direct is mandatory for WPS, this means WPS only works on 2.4GHz, not…
Hi,
For proper connection with Uniflash software it mandatory to connect reset of CC32xx. At LaunchPad this is done via pin PA6 of on board XDS-110. I am not sure where and if pin PA6 is connected at TMDSEMU110-U AUX connector. Maybe one of GPIO pins…
Part Number: CC3235MODASF Other Parts Discussed in Thread: CC3220MODA , UNIFLASH Tool/software: Hi Champs,
I am asking this for our customer.
1. Is AT command set used for CC3220x same as that for CC3235x?
https://www.ti.com/lit/ug/swru534d/swru534d…
Part Number: CC3235MODASF We use AT commands to communicate to CC3235 for forming a TCP connection to our server. We are getting a successful connection to the router but later get a disconnect error 10 "NOT_DISCONNECTED_BY_USER". What does this error…
Part Number: CC3235MODASF Other Parts Discussed in Thread: CC3235SF Hi, My customer wants to evaluated httpget example on CC3235SF Launchpad. SDK version is 7.10.00.13. He follows steps described in Quick Start Guide and httpget project was imported to CCS…
Hi Darian,
Thanks for carrying out the tests you've described - my out-take from that is 'don't try and migrate SysConfigs - start from scratch every time, which is effectively what I ended up doing.
Just to be clear, there are two distinct…