Part Number: CC3XXXRADIOTEST Hi all,
using Radio Tool for certifications following functions are not available. How to set it?
we can’t select a specific Data rate reception mode in the RX test using the current test program.
when receiving mode…
Part Number: CC3XXXRADIOTEST Other Parts Discussed in Thread: CC3220S , CC3120
Hello,
I am currently trying to get the Beta Version of the radio tool for TI Simplelink Wi-Fi CC3220S development kit working.
After extracting the files into the TI directory…
Part Number: CC3XXXRADIOTEST Other Parts Discussed in Thread: CC3100 , CC3200 , CC31XXEMUBOOST , CC3100MOD Hi all,
when connection in CC3100/CC3200 Radio Tool with CC31XXEMUBOOST was successfully established after about 20 sec, the program crashes. Within…
Part Number: CC3220SF Other Parts Discussed in Thread: CC3XXXRADIOTEST , CC3220MOD , CC3220MODA , CC3200 , CC3100 Issue: The customer uses the CC3220SFMOD for design development and then find that the quality of the board they design is worse than the WIFI…
Hi,
What SP are you using?
Are you based on RadioTool software? ( https://www.ti.com/tool/CC3XXXRADIOTEST )
Can you try with less than 10000 packets? can you use the packetized interface instead?
Does other use-case (not RF testing related) works for you…
The station will send probe requests during scan.
You can open a transceiver socket where you have more control over the TX (see ch. 13 in https://www.ti.com/lit/swru455 ).
Transceiver mode is used by the CC32xx Radio Test through the https://www.ti.com…
Part Number: CC3120MOD Other Parts Discussed in Thread: CC3120 , CC3XXXRADIOTEST Hi ,
I am trying to test transmission of unmodulated CW signls using this module. Currently smart RF tool only supports CC3200 and CC3100 and this link " https://www.ti.com…
Hi,
It appears you are trying to use the CC3100/CC3200 radiotool with the CC3235.
Please use the latest release of CC3XXXRADIOTEST, which has support for the CC3235. You can download it here: https://www.ti.com/tool/download/SIMPLELINK-CC32XX-SDK
Do…
You can test the radio performance with the radio tool ( https://www.ti.com/tool/CC3XXXRADIOTEST ).
Since you are using the module it shouldn't be related to the Antenna (the device performs the required calibrations automatically - see chapter 4.9 in the…
Hi,
SmartRF Studio doesn't support these devices.
Do you mean Radio Tool?
There are 2 Radio tools. One works for CC3100 & CC3200 and the other one works for CC3xxx devices.
Please down load the Radio tool C3XXXRadioTest from the following…