Part Number: CD74HCT4052 Other Parts Discussed in Thread: CD74HC4052 Hello expert,
My customer is wondering if it is okay that #E is given a high level before VCC is ready. They used CD74HCT4052 in audio application and they have issue with no sound…
Part Number: CD74HCT4052 Other Parts Discussed in Thread: CD74HC4052 Hi
can CD74HCT4052 support 5V VCC power supply and 3.3V I/O control?
can CD74HC4052 support 3.3V VCC power supply and 3.3V I/O control?
thanks.
Other Parts Discussed in Thread: CD74HC4052 , TPS74801 , TCA9546A , SN74LVC2G07 , SN74LVC1G32 Hello,
Please help to provide the shelf life data for the below part ASAP.
Item Code
Description
Manufacturer
MPN
Shelf life Duration
…
CD4000 family devices are optimized for higher supply voltages. As shown in figure 3 of the datasheet, the channel resistance increases with lower supply voltages, and it is not even specified at 3.3 V. I'd guess that the output impedance of the signal…
There appears to be no such single-supply device where signals are allowed to go below GND. It would be possible to combine two TS5A22364 devices.
But if you have a negative supply for the audio, you can use a dual-supply switch like the CD74HC4052…
Hi Christina,
Thanks for sending that information.
It looks like TMUX1204 does not have the bandwidth to support eARC at its maximum data rate.
Since you are using two 4:1 switches, a dual 4:1 with higher bandwidth might be a better fit. Please…
Part Number: CD74HC4051 Other Parts Discussed in Thread: TMUX1208 , CD74HCT4051 , TMUX4051 Dear Technical Support, I have questions regarding P. 8 of CD74HC4051 device, Attached is the related datasheet & P. 8 of the related datasheet of this device for…
The only major difference is the bandwidth (50 MHz vs. 200 MHz). The other differences are minor.
www.ti.com/assets/js/compareParts/compare.html?parts=CD74HC4052,SN74LV4052A
Other Parts Discussed in Thread: CD74HC4052 I am trying to multiplex 4 sensors using UART communication to an Arduino Serial input. I only need to communicate with one serial device at a time and need to be able to select which device to communicate with…
8 thermistor connection.pdf
YEs, you can but things to remember,
1 GPAI- GPAI+ can measure upto 2.5V from local gnd
2. it will not flag OT.
I attached reference for you.
see if you are okay with it.
You can have idea and do your own circuit…
