Part Number: CD74HCT4051-Q1 Hi Team,
Looking for the Junction to case information or this devices.
Part Number: CD74HCT4051 Hi team,
My customer wants to know about the specification of CD74HCT4051M96 (SOIC) listed below but not described on the datasheet. Could you help me?
VOH (e.g. VCC-0.1 to VCC)
VOL (e.g. VEE to VEE+0.1)
Thermal resistance parameters…
Part Number: CD74HCT4051 Dear all,
One customer is using msp432 for their project.
Now MSP432 UART is not enough, and customer want to control more UART slave device.
They would like to use CD74HCT4051 to extension UART by switching MSP432 UART to difference…
For the TMUX1108 - the switching time between channels is listed as Ttransisition. Please see the image for the 5V spec parameters of this device
The propagation delay from a switch is typically very small as the device can be equated to a wire…
Part Number: CD74HCT4051 Other Parts Discussed in Thread: TMUX1208 Suggest me this part is available if not suggest me alternate part, because we used in our legacy product
Part number : CD74HCT4051PWR
Description : MUX/DEMUX,74HC4051,ANALOG,TSSOP16
Part Number: CD74HCT4051 Other Parts Discussed in Thread: CD74HCT4053 , CD74HC4051 , MUX508
I was looking for the CD74HCT4051 in a TSSOP package, though it seems to only be available in PDIP and SOIC, while the CD74HC4051 (HC series) and the CD74HCT4053…
Part Number: CD74HCT4051
My customer is using CD74HCT4051 for their new design FY2018.
However, there are problem ( oscillation at COM output ) for their ES borad in case by case.(cause unknown),
but customer is concerned about their power up …
Part Number: CD74HC4067 Other Parts Discussed in Thread: CD74HCT4067 , , CD4067B , CD74HCT4051 , MUX506 , MPC506 , MUX508 The customer is working on a design that has a lot of current and feedback loops they feed into an ADC.
They use a lot of MUXes in front…
Part Number: CD74HC4051-Q1 Other Parts Discussed in Thread: CD74HCT4051-Q1 Hi Team
may I get your reply on the below ?
[Q1] CD74HC4051-Q1 can bi-directional transfer analog signal in the range of ± 6V by VCC ~ VEE pins by setting VCC = +6V and…
Other Parts Discussed in Thread: CD74HC4051 , CD74HCT4051 , CD4051B Hi ...,
I have inherited a legacy issue on a precision optical instrument that measures very low levels of light. The original designers used very good opamps for the signal conditioning…