Other Parts Discussed in Thread: CDCM6208V1EVM , CDCM6208 Hello, Our customer uses CDCM6208V1EVM. When our customer measured phase noise of CDCM6208V1EVM, that is different from the data sheet specifications. Could you please check the attached file?(Phase…
Other Parts Discussed in Thread: CDCM6208V1EVM Hello! I would like to communicate with my CDCM6208V1EVM via I2C from a microcontroller eval board (Tiva TM4C123G Launchpad). Is there a way to connect the SDA/SCL lines directly? Thanks! City
Part Number: CDCM6208 Hello, what are the differences between the CDCM6208V1 and CDCM6208V2? Also, what are the differences between CDCM6208V1EVM and CDCM6208V2EVM?
Thanks in advance.
Part Number: TDC7200EVM Other Parts Discussed in Thread: CDCM6208V1EVM , CDCE925PERF-EVM , CDCM6208 , CDCE925 , TDC7200 Hi Team,
Can we use CDCE925PERF-EVM or CDCM6208V1EVM as external clock source so TDC7200EVM? If not, which evaluation kit we can use as external…
Hi Patrick,
I'm assuming the config I uploaded to you in the other thread below resolved this issue as well, but to make the answer explicit for any others searching this answer in the future: Y4 and Y5 are wired such that PRI_REF or SEC_REF can bypass…
Hello Ray,
I took your register settings and loaded them on to the CDCM6208V1EVM. I did not have any trouble with the PLL locking.
Here are some things to try:
1) Click on the Calibrate button to re-calibrate the PLL.
2) Probe your SEC_REF input to ensure…
Hi,
The clock generator described in the document is the CDCM6208. The easiest way to evaluate the device according to the procedure in the document would be to use the evaluation module (EVM) for the device, which can be found here:
The following documents…