Part Number: CDCV304 Hi,
There is already a thread on forum related to output impedance over temperature for CDCV304, But the characterization result is not available.
Please share output impedance value for CDCV304.
Thanks and Regards
Raja
Part Number: CDCV304 Other Parts Discussed in Thread: LMK00804B Hi, I have an CLK input to CDCV from an Oscillator which is operating at 3.3V , the VDD connected to CDCV buffer is 2.5V which gives 2 clk output out of 4 at 2.5V level ,ll this work or cause…
Part Number: CDCV304 Can the CDCV304 be used as a data buffer also?
I need to buffer a clock and a data line out to 3 loads at 80 MHz. If I use the CDCV304 for the clocks, then if I use another CDCV304 for the data the part-part skew may be acceptable…
Part Number: CDCV304 Hi Dear expert,
My customer is asking about CDCV304 output impedance when VDDIO=3.3V.
Would you please help support this?
Thanks a lot!
BR,
Joyce
Part Number: CDCV304 Other Parts Discussed in Thread: LMK1C1104 We plan on using the CDCV304 as a clock buffer for our JTAG TCK signals. Does the CDCV304 require a continuous clock, or can the input clock start and stop (like what it does for the JTAG…
Part Number: CDCV304 hi dear supporting team,
in customer's p/l, they found 3pcs CDCV304 CLKIN pin issue which pull the input signal voltage to 1V. below is the waveform they got in normal brd, pls help double check whether such overshoot will cause…
Part Number: CDCV304 Hi Team,
Good day.
My customer is looking to find the output impedance of the CDCV304 CMOS buffer over temperature. Or a min/max spec for the output impedance over the acceptable temperature range. Do we have this data?
The buffer…
Part Number: CDCV304 hi dear supporting team,
in CDCV304 D/S, there is only requirement on input voltage level, do we have requirement on input duty cycle and any other spec? tks a lot!
