Part Number: CDCE925 Other Parts Discussed in Thread: CLOCKPRO , CDCM6208 Hi,
Are there any off the shelf solutions for programming the EEPROM without going through ClockPro?
I want my users to easily switch through a handful of configurations with…
Part Number: CDCE913PERF-EVM Other Parts Discussed in Thread: CLOCKPRO
Hi Team, My customer is evaluating CDCE913PERF-EVM and using TI ClockPro for register writing. http://www.ti.com/lit/ug/scau022a/scau022a.pdf Which write process is done "Byte Write…
Hi, All
I'm using Clock Pro to generate setup below.
Y1=27Mhz, Y2=27MHz, Y3=24.576MHz.
but the generated set up is for Y1=27MHz, Y2=24.576MHz, Y3=27Mhz.
(manually, I can set Y1=27Mhz, Y2=27MHz, Y3=24.576MHz.)
I'd like to know if there is any…
Part Number: CDCE913 Other Parts Discussed in Thread: CLOCKPRO Hi!
We would like to use the CDCE913 chip to generate a variable frequency between 4MHz - 40MHz.
For this, we want to be able to calculate the required N,P,Q,R and Pdiv values to dynamically…
Part Number: CDCI6214 Other Parts Discussed in Thread: LMK03328 Please advise me on a question bellow:
I want to generate 148.5 MHz and 148.35174 MHz from 27 MHz reference using CDCI6214 enabling fractional divider in it. I have chosen the 2700 MHz…
Hi,
My customer asked us following question about "Reset PPM refernce".
* When user pressed this button, could you tell us which registers are set ?
I think that variable of this GUI program is just cleared by pressing "Reset PPM reference". …
the file 1780.ClockPro-1.2.1.exe created a new directory in Texas Instruments Inc\ClockPro.1.21 The Sw is copyright 2005
I uninstalled the driver as found in device manager and reinstalled from the newly loaded files.
The EVM Programmer window cannot…
Hi,
Please refer to the PLL book ( http://www.ti.com/tool/pll_book ) on how ClockPro optimizes Loop Filter components depending on closed and open loop criteria. The book goes into details about the trade offs and advantages several design techniques…
I am currently having a similar problem but it is slightly different.
I install ClockPro software but I always get TUSB3410 Device in the Device Manager and it has the ! on the device.
When I look at the properties this is what it says
Windows cannot…
Other Parts Discussed in Thread: CDCE949 , CLOCKPRO , CDCEL9XXPROGEVM i am trying to program cdce949 with cdcel9xxprogevm using clockpro. Earlier i had no problem in finding my device in the ' TI Clockpro programmer' dialog box .But once i tried to install…
