Part Number: CSD25484F4 Other Parts Discussed in Thread: CSD17382F4 Hi, We using P-MOSFET, Source connected to 24VDC source, Drain connected to Relay coil one end, Relay other connected to Ground. MOSFET Relay will be always ON(Drain=24V) for any of gate…
Part Number: BQ77915 Other Parts Discussed in Thread: CSD17382F4 , CSD17483F4 Hello Guys,
Good day.
According to the device datasheet, the external MOSFET to use must be selected with a threshold voltage less than 1.7 V.
Does BSS214NH6327 meet this requirement…
Hi Kevin,
Thanks for promoting TI FETs at your customers. We don't make any 30V P-channel FETs. Our's only go to 20V. Also, we don't offer SOT23 package for either N-channel or P-channel devices. With that in mind, I would recommend the CSD17382F4 FemtoFET…
Part Number: CSD97395Q4M Other Parts Discussed in Thread: CSD17382F4 , TPS51604 , CSD87384M , CSD87588N Dear all,
The customer is currently considering the CSD97395Q4M, but has been asked if similar performance can be achieved using two FETs and a driver…
Clifton,
OK, now I understand the question.
This device has a single ended Gate ESD protection diode between the gate and source if you put a negative voltage on the gate this diode from gate to source will forward bias and turn on. In the datasheet…
Hello Ras,
Thank you for considering the LM5134 in your design. I am an application engineer supporting this device and I will address your questions. Since the PILOT FET can be low voltage such as 20V, the gate charge can be very low and still have low…
Other Parts Discussed in Thread: CSD17382F4 , CSD25484F4 , CSD25480F3 , CSD17484F4 , CSD18541F5 Hello,
I am trying to get my hands on some reasonable ltspice models for femtofets: CSD18541F5, CSD17484F4, CSD17382F4, CSD25480F3, CSD25484F4. I am aware of the…
Other Parts Discussed in Thread: CSD17382F4 Hi,
Please let me ask how to calculate junction temperature.
In case of CSD17382F4, the Pd of body diode at ISD=0.02A will be 0.6V so Pd=12mW. Then can I calculate Tj by using RθJA and this Pd, and Tj can allow…