Part Number: CSD17575Q3 Tool/software: Dear All,
We would like to inquire about the material numbers CSD17575Q3T (small reel) and CSD17575Q3 (large reel). Are there any differences between them?
According to TI's product numbering, the difference should…
Part Number: CSD17575Q3 Tool/software: Hello to all.
I've been trying to design a battery powered LED design circuit. I am using TPS61235 for boosting a 18650 battery paralelled with 2 cells. The LED board consumes 1.3A. I also use BQ29700 for battery…
Part Number: CSD17575Q3 Can you please help share the detailed thermal model for NMOSFET- CSD17575Q3 for thermal simulation? Can you also share the 2R model for the same?
Thanks!
Part Number: BQ25798EVM Other Parts Discussed in Thread: CSD17581Q3A , CSD17575Q3 Hello,
The BQ5798EVM uses CSD17575Q3 for Q5 and CSD17581Q3A for Q1/Q2/Q3/Q4. Can CSD17575Q3 be used for Q1/2/3/4 to help consolidate the BOM?
Thanks,
Michael
Part Number: TPS43061 Other Parts Discussed in Thread: CSD17575Q3 , TPS43060 Tool/software: Hi support team,
If I use the CSD17575Q3 as the MOSFET, is the gate voltage of the TPS43061's 5.5V sufficient? Is the TPS43060's 7.5V excessive?
Regards…
Part Number: CSD17575Q3 Hi,
Could you please provide the ESD information (HBM/CDM/MM) of CSD17575Q3 ?
There is no exact information in the data sheet.
Thanks in advance.
JH
Hi Harry, This is regarding the schematic I sent you via private message.
Is it possible that the CSD16340Q3 is damaged because its VGS withstand voltage (+10V, -8V) is low? Would it be appropriate to change to the CSD17575Q3, which has VGS=±20V?…
Part Number: CSD17575Q3 Other Parts Discussed in Thread: CSD17304Q3 , Comparing two part datasheets (CSD17575Q3 and CSD17304Q3) with identical packages (SON 3.3mmx3.3mm), looking at recommended footprints:
1) Recommended Footprint Drawing note M0143-01…
Part Number: LM34936 Other Parts Discussed in Thread: CSD17575Q3 , , CSD17577Q3A I'm working on my LM34936 Buck-Boost design. I need the 3D step files for the MOSFETs: CSD17577Q3A and CSD17575Q3. I need to accurately model my design in 3D because space…