Part Number: BQ40Z50-R1 Hi
My customer design with BQ40z50-r1, CMOS is two parallel CSD17577Q3A Vgs only 1.5V, can not charge.
Please help check the attached schematic.
BQ40Z50 3S2P电池组 电路图.pdf
Waiting for your reply.
Thanks
Star
Other Parts Discussed in Thread: CSD17318Q2 , CSD17581Q3A , CSD17577Q3A , CSD87334Q3D Hi Team,
I want to choose an N-mosfet to be used in the 18V@12A scenario. I initially chose CSD17318Q2. Is this the best option? Our requirement is small size, low…
Charles,
The CSD17577Q3A FET is rated at 30V, which is very likely the issue.
In the PMP20183 circuit, the FET will see Vout/3 = 200V/3 = 66V, since it has a voltage tripler. If your application is 180V, the FET will see about 60V. It is very likely…
Hi Jeff, I just completed designing with BQ24610RGER. The adapter current is set to 9A and the battery charge current is set to 8A. I am using CSD25402Q3A P-channel MOSFET on the adapter side and CSD17577Q3A N-channel MOSFET on the battery side. both…
Part Number: TPS40077 Other Parts Discussed in Thread: CSD17579Q3A , CSD17577Q5A , CSD17579Q5A , CSD17577Q3A Dear team
There is a good news that we design in TPS40077 in customer's new project.
The spec is Vin=19V,Vo=12V,Io=12.5A.
Could you help…
Hi Martin,
My colleague reminded me that we have a 30V FET, CSD17577Q3A, with similar specs in the same package size that is 100% Pb free. Please take a look to see if this will work for your customer.
Part Number: LM5121-Q1 Other Parts Discussed in Thread: CSD16340Q3 , BQ24640 , CSD17577Q3A , , LM5121 Tool/software: WEBENCH® Design Tools Hi,
Im trying to understand how the tool selects parts when it does the automatic selection. I tried 4.5Vin 9Vout…
Hi Scott,
Nice to hear from you again. Is this the same application we discussed previously on e2e and over regular email? We have a load switch FET selector tool available at the link below. The lowest rds(on) in 2x2mm SON is the CSD13202Q2 which is…
Part Number: CSD17573Q5B Other Parts Discussed in Thread: CSD17577Q3A Hello,
i'm actually designing a power supply circuit using a boost converter IC from TI. One of the MOSFETs i'm using it's the one listed above.The data sheet has a recommended PCB…
