Part Number: TIDA-00120 Other Parts Discussed in Thread: CSD19531Q5A , CSD19532Q5B , CSD18502Q5B , MSP430F5132 Hi,
I am using TIDA-00120 reference design for MPPT solar Charge controller.
As mentioned in the test results of TIDA-00120 i tried to upgrade…
What do you mean by 'Charger'? Can you also answer to my questions below?
1. TIDA-00120 software should be transferred to MSP430F5132 by user? If so, how can we do it?
2. You wrote above that we should change the FET to TO-220 package to increase…
Part Number: TIDA-00120 Other Parts Discussed in Thread: CSD19531Q5A , CSD19532Q5B , CSD18502Q5B , CSD18532Q5B , TIDA-010042 Hi Team,
I am using TIDA-00120 reference design for 48V System.
I have replaced the CSD18532Q5B with CSD19531Q5A and CSD18502Q5B…
Hi Vishnu,
According to the Test Report Description, the design can be easily adapted to 48V systems by just changing the MOSFETs to 100V rated parts. You're limited by the CSD18502Q5B FETs and will need to find a suitable replacement.
Regards,…
Part Number: BQ24650
I am using this part as in the attached schematic to charge a lead acid battery from a solar panel.
I want to set a maximum charge current of 10 amps as per the datasheet section 8.3.3. where Icharge = 40mV / Rsr
When testing…
Part Number: BQ24650 MBRST-P7.pdf
I m using the BQ24650 in the attached design to charge a lead acid battery.
I selected the 0.004 ohm resistor to give me 10A of battery charge current but am only getting 5A
As per the datasheet, I expect to…
Part Number: BQ24650 6558.MBRST-P7.pdf
I implemented this part as in the attached schematic page to charge a lead acid battery
I selected the battery current sense resistor to be 0.004 ohms for an expected charge current of 10A but am only getting…
Hi Nikos,
Thanks for the inquiry. I am the applications support for TI's power MOSFETs. I was not involved in this design but will try to help you out. What is the input voltage range for your design? Does it need to support the same 15Vin to 44Vin…
Hi sir, Can you please verify this layout with the schematic sir. don't worry about the routes sir. All the routes are perfectly fine and are kept in accordance with their current capabilities. please verify the positioning of the components sir.
Any…
