Part Number: CSD18531Q5A Other Parts Discussed in Thread: CSD18532Q5B Hi,
I am using MOSFET part – CSD18531Q5A. The MOSFET is used as Ideal diode & as a Load switch.
The maximum steady state current is 16A and maximum inrush current can be…
Part Number: CSD18531Q5A Other Parts Discussed in Thread: CSD18533Q5A Hello,
Could you confirm whether the junction-to-case thermal resistance (1 W/C) given for this part (CSD18531Q5A) is to the case top or bottom?
Also, do you have a junction-to-board…
Hey David,
Please find attached the PCB and schematic layouts as well as the filled out calculator. (For reference, I did fill out this calculator before designing the circuit).
Not pictured is the newly added capacitor, but that is a 47uF capacitor connected…
Part Number: CSD18531Q5A Other Parts Discussed in Thread: TINA-TI , Tool/software: TINA-TI or Spice Models Dear :
Do you have CSD18531Q5A HS SPICE MODELS, The client has a robot project that uses this P/N on motor drive circuit, need HS SPICE MODELS, Th…
Being able to disable the pre-driver fault detector when it seems to trigger erroneously would be pretty useful for us.
I've ordered some 120 Ω resistors and will try to fit them once they arrive, this isn't my preferred solution as I have ~800 boards…
Part Number: CSD18531Q5A Hello Team,
When configuring the switching power supply using this FET, there is a short period during which the current flows through the body diode before switching starts when the power is turned on.
Please tell me the following…
Part Number: CSD18531Q5A Hello,
About CSD18531Q5AT, In datasheet Addendum-Page 1 , There is only CSD18531Q5A on Op Temp (° C) -55 to 150℃ there.
What is the Op Temp (° C) value of CSD18531Q5AT?
Regards,
Taichi Nakamura
Hello Sv,
Thanks for the updated information. For 24V peak input voltage, you should be able to use a 30V FET. I'd recommend the CSD17573Q5B, 30V N-channel in 5x6mm SON package. The conduction loss for each FET at 40A is about 2.3W at TJ = 100°C and increases…