Part Number: PMP8861 Tool/software: Hello,
My customer designed a board based on the PMP8861 reference design.
- VIN = 24V, VOUT = 12V, IOUT = Max 10A
When they tested the operation by increasing the load on the output, an issue occurred where the…
Amr Ayoub said: BOOSTXL-DRV6301
Did you mean BOOSTXL-DRV8301?
Based on the documentation (or website), I don't think this driver can be used for induction motor.
"The BOOSTXL-DRV8301 is 10A, 3-phase brushless DC drive stage based on the DRV8301…
Other Parts Discussed in Thread: DRV8302 , DRV8301 , CSD18533Q5A HI
I use the DRV8302 to drive H-bridge for dc motor with a low side current resistor.
so i use only one current sense amplifier SP1 to high side of current resistor and SN1 to ground…
Thanks Nick,
I'm doing up a board now, based heavily on the BOOST DRV8301.
Nicholas Oborny said: The 10A rating is actually limited by thermal dissipation for the PCB What specifically would you recommend if I wanted to be able to pull 16A (continuous…
Yes, there will be a few other items to change. I'd recommend looking at the PMP8812 TI reference design ( http://www.ti.com/tool/PMP8812?keyMatch=pmp8812&tisearch=Search-EN#Technical Documents ) which converts the TPS23752EVM-145 (5V, 5A) to a 12V, 2…
Hello John,
Thanks for your answer. Let me clarify some aspects of my current setup:
-To know the Junction temperature I'm using the RθJA from the datasheet, I know that it doesn't fit to my current design (I will try to adapt this value to my PCB…
Please have a look at fet options in same package as EVM so it is easy to change. I will click TI thinks resolved and once you have the board and if you still have issues please contact.
Mathew
fet options.xlsx
Part Number: TPS23734 Other Parts Discussed in Thread: TPS23731 Hello Team, 1.secondary side of PoE circuit used in our design, MOSFET based complex circuit is suggested in Evaluation module schematic. Can we change that to a diode based circuit? Please…
Part Number: TPS2373 Other Parts Discussed in Thread: PMP7499 , UCC2897A Hi Sir
The Customer use TPS2373 to modify PMP7499 to finish 12V/5A spec request.
May you pls help check if the circuit is ok?
Bogey tps-2373 sch output 12v-1.pdf
