• 

  John Chou62

  • 8 months ago
  • Power management
  • Power management forum

  CSD19535KTT: VDS leakage current increase over time

  TI Thinks Resolved

  Part Number: CSD19535KTT hi Team, it's reported by our customer on one of the CSD19535KTT IC it's observed that the VDS leakage current will increase over time, can we have your comment on this? VGS:200kohm VDS: 28.8V monitor VDS current...
• 

  Jnaneswar Kandula

  • 10 months ago
  • Power management
  • Power management forum

  CSD19535KTT: How to achieve good heat rejection?

  TI Thinks Resolved

  Part Number: CSD19535KTT How can I achieve good heat rejection of Power MOSFET CSD19535KTT with D2PAK package? While comparing to the base area of MOSFET, I am increasing the copper area on the PCB like 10%, 20%, 30% and so on. while doing like that...
• 

  Gleb Korenzvit1

  • 8 days ago
  • Power management
  • Power management forum

  LM5102: LM5102MM power dissipation reducing

  • Resolved

  frequency is 400KHZ. Driver drive CSD19535KTT mosfets (7.9nF). The LM5102MM is overheating. I've added
• 

  Kuan Wei Chen (Kevin Chen)

  • over 1 year ago
  • Power management
  • Power management forum

  CSD19535KTT: ESD

  TI Thinks Resolved

  Part Number: CSD19535KTT Dear Team, Can you provide below spec? BR Kevin
• 

  Karikalan Selvaraj

  • 3 months ago
  • Power management
  • Power management forum

  RE: LM7481-Q1: Redundant Supply OR-ing with Over Voltage Protection and ON/OFF control

  Hello Sam, At this point, a design tool or calculator for SOA of MOSFET is not available. But for 100W Design requirements at 6.7A maximum current and 54V maximum voltage, 100V rated MOSFETs such as CSD19535KTT or CSD19532Q5B is recommended. If...
• 

  John Wallace1

  • 8 months ago
  • Power management
  • Power management forum

  RE: Looking for SMD Mosfet

  Hi Murthy, Thanks for your interest in TI MOSFETs. Our closest cross reference is CSD19532KTT. The on resistance is a little bit higher. If this is too high, then you can consider the CSD19535KTT which is lower on resistance.
• 

  Kursad Kilinc

  • over 1 year ago
  • Motor drivers
  • Motor drivers forum

  DRV8353R: DRV8353RH Gate Drive Fault

  TI Thinks Resolved

  Part Number: DRV8353R Hi everyone, We have designed and currently testing a BLDC motor driver utilizing a DRV8353RH smart driver with CSD19535KTT power MOSFETs. The problem we've encountered is that the driver doesn't turn on two of the high...
• 

  John Chou62

  • over 2 years ago
  • Power management
  • Power management forum

  CSD19535KTT: what is the IDDS (drain-to-source-leakage-current) range for CSD19535KTT

  TI Thinks Resolved

  Part Number: CSD19535KTT Hi Team, customer using CSD19535KTT and found some pcs that due to leakage current too high and there is a remaining voltage present even with the FET is turned off. resulting the output voltage will still turn on the remaining...
• 

  Kevin Den Toom

  • over 2 years ago
  • Power management
  • Power management forum

  CSD19535KTT: Thermal Resistance Junction to Top

  • Resolved

  Part Number: CSD19535KTT Hi Team, the datasheet specifies the following thermal resistance. Can you
• 

  John Pan

  • 11 months ago
  • Simulation, hardware & system design tools
  • Simulation, hardware & system design tools forum

  TIDA-00281: MOSFET selection

  • Resolved

  the BLDC motor is CSD19535KTT . I am concerned whether it is suitable for 30 A continuous current

Didn't find what you are looking for? Post a new question.

• Ask a new question